Piecal 334 4-20 mA Loop Calibrator, Industry standard replaces Altek 334
Piecal 334 4-20 mA Loop Calibrator, Industry standard replaces Altek 334 4-20 mA Calibrator. Includes rubber boot and FREE NIST Traceable Certificate of Calibration (Optional hands free carrying case 020-0211). Just Like an Old Friend – A dependable milliamp loop calibrator Calibrate Milliamp InstrumentsSource 0.00 to 24.00 mA & -25.0 to 125.0% of 4-20 mARead 0.00 to 52.00 mARead -99.99 to 99.99 VSimulate 2-Wire Transmitters; Power & Read 2-Wire Transmitters Calibrate with ConfidenceAccurate to ±0.025% of Span at 4.00 & 20.00 EZ-CHECK outputs Use in the Plant, Field or ShopIncludes Rubber Boot and Attached Test Leads; Low profile switches resist accidental damage Simple Battery ChangesSeparate compartment for no-tool battery changes with four inexpensive “AA” batteries Optional AccessoriesAC Adaptor 120V (020-0101); 240V (020-0100); Deluxe Hands Free Carrying Case (020-0211); NiMh Batteries & Charger 100 to 240 VAC (North American Plug)/ (020-0103) Improvements over 334 milliamp loop calibrators from other manufacturers include better longer term stability, accuracy, reliability & ruggedness plus improved battery life. PIE Model 334 is the perfect replacement for your worn out milliamp calibrators! Additional information Weight 2 lbs Dimensions 6.75 × 4.25 × 3.5 in Advantages of the PIE 334 over the Altek 334 and Altek 334A milliamp loop calibrator Backlit Display with Larger DigitsEasier to read in dark areas of the plant More Resistant to Accidental DamageRubber Boot and Stronger Switches Separate Battery Compartment with 4 “AA” BatteriesNo more removing housing with screwdriver to replace three expensive 9V batteries. Calibration seals remain intact. Calibrate More Devices Between Battery ChangesDrives more loop instruments at 24 Volts (up to 1200 Ohms) for entire battery life. The Altek 334 output voltage drops as the batteries run down. Includes Certificate of CalibrationAll PIE Calibrators come with a free signed and dated certificate. Altek calibrators come only with an unsigned Statement of Calibration Practices with a certificate of calibration available for an extra charge.