Tramex CMEX2 CMEXpert II
The New Concrete Encounter CMEX2 is a digital display version of the Tramex Concrete Encounter CME4 handheld electronic impedance moisture meter. It operates on the principle of non-destructive impedance measurement. Parallel co-planar electrodes are mounted on the base which, during operation, transmit a low-frequency signal into the concrete floor. To carry out moisture tests simply brush any dust from a smooth area of concrete and also from electrodes, switch on the CMEX2 and hold to the surface to read the percentage moisture content. There is absolutely no surface damage and no waiting. This device comes highly recommended by flooring manufacturers.
- SKU No: CMEX2
- CMEXpert II (Instrument only) Digital Meter with Optional Humidity & Wood Probes available.
- Measuring range wood: 7% to 40%
- Measuring range concrete: 0 to 6.9%
- Measuring range gypsum: 0 to 12%
- RH: 0 to 99%
- Reference scale: 0 to 100
- Penetration: 20mm
- Field penetration depth: 12.5mm
- Size: 150mm x 85mm x 38mm
- Weight: 319g
- Power: 9 Volt PP3 Battery
Relative Humidity (Rh) Probe Hygrometer mode
When the Tramex RH Probe is plugged into the CMEX2, it automatically changes to Hygrometer Mode. The Tramex RH Probe provides the ideal solution for measurements of ambient relative humidity, temperature, and dew-point conditions within the building structure and in structural materials such as concrete flooring, walls, and other surfaces, as well as the environmental conditions within the building or structure. Humidity readings are displayed in both percentage Relative Humidity (%RH) and mixing ratio (grains/lb or grams/kg). The solid-state capacitive sensor in the RH probe gives accurate, fast results, allowing testing of concrete slabs to ASTM F 2170 (Insitu Method), ASTM F 2420 (RH hood method), BS 5325 & BS 8203 standards (RH probe not included).
Wood Moisture Pin Probe Pin-Type Resistance Mode
PIN PROBE mode is extremely easy to use. Simply select the Pin Probe using the ® key on the CMEX2 instrument. Insert either the Tramex Hand Probe or Hammer Probe directly into the socket at the top of the instrument. The pin probe gives accurate readings in 0.1 % increments over the entire measurement range. Readings are displayed on the LCD of the CMEX. The Pin Probe offers a practical and accurate way of determining that wood is at the correct moisture level for its intended use, proving to be a vital tool for testing of structural lumber in the drying process, probing deep into wall cavities, good quality control of wood flooring and other wood applications.
TestEquipmentUSA carries a wide selection of the most trusted brands and products in the industry. When you need the job done right and safely the first time, call the experts at TestEquipmentUSA to supply the best equipment at the best prices.