AEMC K110 Description:
The AC/DC Microprobe Model K110 measures as low as 100µA AC or DC. The unit has proportional mV output for direct readings on DMMs. The high accuracy K110 is ideal for calibration of current loop process instruments (e.g., 4 to 20mA or 0 to 20mA). Its very small size and "clip" shape make it ideal for probing and measuring in tight wiring areas such as circuit boards, 4 to 20mA process loops or automotive electronic circuitry.
Features
- Measures extremely low level DC from 100µA
- Outputs signal proportional to total current (AC + DC)
- Low noise
- Ultra-compact size and non-contact clamp-on convenience
- Simple plug-in operation
- Designed for use with DMMs and oscilloscopes
- Accurate display of wave forms
- No range or mode (AD/DC) switching required
- Extended battery life
- Red LED indicates momentary or continuous overload
- Green LED indicates power and battery condition
- Double Insulation
- CE Mark
Applications
- Industrial process controls (4 to 20mA current loops)
- Electronic circuit design, testing and repair
- Automobile wiring and engine control systems
- Avionics systems maintenance and repair
- Fault and signal location in complex networks
- Ground and leakage current measurement
- Pre-deployment testing of power-conscious equipment
AEMC K110 Specifications:
| Nominal Range | 0 to 3Arms/0 to 4.5A DC |
| Measurement Range | 0 to ±4.5A |
| Output Signal | <100µV, DC to 3kHz |
| Accuracy (4.5A Range) | AC: ±2.0% of Reading ±200µA DC: ±1% of Reading ±200µA |
| Overload | Red LED indicates momentary or continuous overload |
| Frequency Range | DC to 2kHz (at -3dB sine) |
| Load Impedance | 200? |
| Working/Common Mode Voltage | 300V, EN 61010-1, Cat. II |
| Battery | 9V Alkaline, NEDA 1604, 6LR61 or IEC 6 LF22 (Approx. 20 hours life) |
| Output Termination | 4mm Safety Banana Plugs |
What's included with the AEMC Instruments K110
- AEMC K110 MicroProbe, Jack, 450mA, 10mV/mA
0 Reviews Hide Reviews Show Reviews
Aemc
AEMC DC/AC MicroProbe Model K100
$770.00
AEMC K100 Description: The DC/AC Microprobe Model K100 measures as low as 100µA AC or DC. The unit has proportional mV output for direct readings on DMM's, loggers and oscilloscopes. Key Features: ...
Aemc
AEMC AC/DC Current Probe Model MR527
$490.00
AEMC AC/DC Current Probe Model MR527 The MR527 is a hall effect current probe with 2 ranges designed for oscilloscopes, waveform displaying instruments, and other frequency sensitive displaying...
Aemc
AEMC AC/DC Current Probe Model MR417
$389.00
AEMC AC/DC Current Probe Model MR417 The MR417 is a hall effect current probe with 2 ranges designed for oscilloscopes, waveform displaying instruments, and other frequency sensitive displaying...
Aemc
AEMC AC/DC Current Probe Model MR415
$350.00
AEMC AC/DC Current Probe Model MR415 The MR415 is a hall effect current probe with 1 range designed for DMM, Data loggers and Power Analyzers. The probe has a 5 ft (1.5m) lead terminated by 4mm...
Aemc
AEMC AC/DC Current Probe Model MR416
$365.00
AEMC AC/DC Current Probe Model MR416 The MR416 is a hall effect current probe with 2 ranges designed for DMM and Data loggers. The probe has a 5 ft (1.5m) lead terminated by 4mm safety banana plugs...
Aemc
AEMC AC/DC Current Probe Model MR525
$329.00
AEMC AC/DC Current Probe Model MR525 The MR525 is a hall effect current probe with a single range designed for DMM, Data loggers and Power Analyzers. The probe has a 5 ft (1.5m) lead terminated by...
Aemc
AEMC AC/DC Current Probe Model MR526
$429.00
AEMC AC/DC Current Probe Model MR526 The MR526 is a hall effect current probe with 2 ranges designed for DMM and Data loggers. The probe has a 5 ft (1.5m) lead terminated by 4mm safety banana plug...
Aemc
AEMC AC/DC Current Probe Model MH60
$715.00
AEMC MH60 Description: The AEMC MH60 (2153.03) AC/DC Current Probe (100A, 1MHz, BNC Output) is designed for use with an oscilloscope in total simplicity. Simply clamp the cable and measure. It can be...