AEMC Instruments 6555 Description:
This megohmmeter is the only fully automated 15,000 V graphical insulation tester. It is packaged in a rugged case that is IP54 when closed. Test results and configuration information is provided on a graphical LCD screen as well as exportable through the use of DataView? software provided. Can also operate on battery or AC power while testing.
It also offers the ability to program up to three step voltage profiles (from 40 to 15,000 V), each containing up to ten steps. There are also three ramp profiles and three programmable test voltages in addition to the standard fixed voltages of 500, 1000, 2500, 5000, 10,000 and 15,000 V.
Features
- Detection and measurement of input voltage, frequency, and current prior to running a test
- Measurements at a fixed test voltage of 500, 1000, 2500, 5000, 10,000 or 15,000 V DC
- Measurements at an adjustable test voltage between 40 and 15,000VDC
- Ramp voltage measurements with a ramp from 40 to 1100V or from 500 to 15,000 V
- Step voltage measurements with steps from 40 to 15,000V
- Non-destructive (Early break) test, test stopped at a preset current (Break at I-limit) or Burn mode with no predefined stop point
- Digital filtering of insulation measurements
- Live measurement of the voltage to warn the operator of potential unsafe conditions
- Programmable thresholds to trigger audible
- Timed measurement duration checks
- Fuse protection with display indication of defective fuse condition
- Stores up to 80,000 measurements
- Optically-isolated USB communication for transfer onto PC and and report generation with the included
- DataView? software
Applications
- Acceptance testing and preventive maintenance
- Test motors, pumps, valves, cables, switch-gears and electrical wiring installations
- Continuity checks
- High resistance or absorption tests
- Spot reading tests
- Timed resistance measurements
- Dielectric absorption ratio (DAR) and polarization index (PI) tests
- Multi-layer insulation testing (DD)
- Test old or water damaged installations over long time periods
- Motor insulation resistance measurements
AEMC Instruments 6555 Specifications:
Insulation Test Voltage | 500 V: 10 k? to 2000 G? (2 T?) 1000 V: 10 k? to 4000 G? (4 T?) 2500 V: 10 k? to 10,000 G? (10 T?) 5000 V: 10 k? to 15,000 G? (15 T?) 10,000 V: 10 k? to 25,000 G? (25 T?) 15,000 V: 10 k? to 25,000 G? (25 T?) |
Fixed Test Voltages | 500/1000/2500/5000/10,000/15,000 V |
Variable Voltages | 40 V to 15 kV Three user programmable voltage schemes |
Ramp Mode | Programmable ramps: start voltage/end voltage/duration |
Ramp Configuration Range | 40 to 1100 V/500 to 15,000 V |
Step Mode | Up to 10 steps (voltage and duration configurable for each step) |
Voltage Measurement After Test | 0 to 2500 V AC 0 to 4000 V DC |
Capacitance Measurement | 0.05 to 9.999 ?F/10.00 to 49.99 ?F |
Leakage Current Measurement | 0 to 8 mA |
Discharge After Test | Yes/Automatic |
What's included with the AEMC Instruments 6555
- Graphical Digital Megohmmeter
- Set of 3 9' Integral Leads (Red, Blue, and Black) and Alligator Clips, 1000 V CAT IV
- Set of 2 Test Probes (Red & Black), 1000 V CAT IV
- Optical USB Cable
- US Power Cord, 115 V
- Small, Classic Tool Bag
- 2 x NiMH Batteries
- USB Stick with DataView Software and Manual