Description For the simple and damage-free removal of ball pins on track rods and push rods

Description Also suitable for removing shock absorbers and other separating and dismantling work The forks are suitable for use in the most confined spaces Hammer blows on the handle ends are...

Description Also suitable for removing shock absorbers and other separating and dismantling work The forks are suitable for use in the most confined spaces Hammer blows on the handle ends are...

Description Also suitable for removing shock absorbers and other separating and dismantling work The forks are suitable for use in the most confined spaces Hammer blows on the handle ends are...

Description Also suitable for removing shock absorbers and other separating and dismantling work The forks are suitable for use in the most confined spaces Hammer blows on the handle ends are...

Description To protect the steering-wheels, the pulling rings are fitted with sliding rubber sleeves The pull rings are provided with sliding rubber sleeves to protect the steering wheel

Description For wheel stud circles 100-155 mm with 6 mm screws For tapped holes up to max. M14 Operation: The puller is attached to the drive shaft flange using the nuts of the wheel bolts. By...

Description With wheel stud protection using rotating nut apertures that always lie flat to the hub for Ø 22 mm and suitable reduction bushing Ø 14 and 18 mm This tool may also be used with the...

Description With wheel stud protection using rotating nut apertures that always lie flat to the hub for Ø 22 mm and suitable reduction bushing Ø 14 and 18 mm Easy to use Upgradeable with...

Description Operation: With pressure released, the press is placed between the pressure spindle and the end of the shaft. The pressure spindle is then tightened firmly. Care must be taken that...

Gedore 8024090 Hydraulic press, 8 t 1.55/1

Description Incl. fitting and dust cover Simple oil filler - can be directly used Simple oil filling, can be used directly