Cal Test CT2593-1 Differential Probe Kit

Cal Test Electronics CT2593 Differential Probe Kit, 25 MHz Bandwidth, 10x/100x Attenuation Differential probes allow for safe, accurate measurements between two voltage points where neither point is referenced to ground. Model CT2593 features either 10x/100x or 20x/200x attenuation setting, 25 MHz bandwidth and ±700 V or ±1,400 V maximum differential.Compatible with oscilloscopes from all major manufacturers, the probe can be battery operated (included) or powered by a universal power adapter (not included). User applications include: Precise power semiconductor device measurements Switching power supply design Measurement of power converters Precise measurement of motor drives Features: Meets IEC 61010-031 safety standard Either ±70 V/700 V or ±140 V/1,400 V differential 25 MHz bandwidth (-3 dB) High CMRR Protective rubber boot Reference SI-9002 (CT2593 -1) or SI-9001 (CT2593 -2) Optional power adapter, 9 V 500 mA, CT3723 Kit contain: Differential probe (2) Hook probes, black & red (4) AA batteries User manual [custom1] Electrical Specifications   CT2593-1 CT2593-2 Bandwidth DC €” 25 MHz Rise Time (10%-90%) 14 ns Attenuation ratio 20x/200x 10x/100x Accuracy ±2% CMRR (typical) -80 dB@50 Hz -60 dB@20 kHz -86 dB @ 50 Hz -66 dB @ 20 kHz Input Voltage:     Maximum Differential Input Voltage (DC + AC peak) ±140 V @ 20x ±1.4 kV @ 200x ±70 V @ 10x ±700 V @ 100x Maximum Common Mode Input Voltage (DC + AC peak) ±140 V @ 20x ±1.4 kV @ 200x ±70 V @ 10x ±700 V @ 100x Absolute Maximum Rated Input Voltage (each side to ground) 1000 Vrms CAT II Input Resistance // Capacitance 4 MΩ // 5.5 pF (each side to ground) Output Voltage:     Swing ±7 V (driving 1 MΩ oscilloscope input) Offset (typical) ±5 mV (adjustable) Noise (typical) 0.7 mVrms Source Impedance 50 Ω Power Supply 4 AA batteries (included) or CT3723 power adapter (optional) CT4122 USB power lead (optional) Mechanical Characteristics Weight 400 g (with probe and rubber boot) Dimensions 170 x 63 x 21 mm BNC Cable Length 95 cm Input Leads Length 45 cm each Environmental Characteristics Operating Temp/Humidity -10°C to 40°C / 25% to 85% RH Storage Temp/Humidity -30°C to 70°C / 25% to 85% RH Pollution Degree Pollution Degree 2 Altitude Operating: 3,000 m Nonoperating: 15,300 m Safety Specifications IEC 61010-031 CAT II [/custom1]