ESR-X1DP-O2CO Replacement Sensor Combo, EC, Carbon Monoxide (CO)

Description Sensor Combo, EC, Carbon Monoxide (CO) 0-300 ppm/Oxygen (O2) 0-25% Vol. for GasWatch 3 The RKI Direct Connect series gas sensors are highly reliable and very cost effective for the detection of common gas hazards. The direct connect series are available for LEL, H2 Specific LEL, LEL IR, Oxygen, H2S, CO, CO2, and for a variety of toxic gases. The sensors for LEL, H2, Oxygen, H2S, CO2, and Carbon Monoxide are explosion-proof with flame arrestors, and approved for use in hazardous areas (Class 1, Div. 1 Groups B, C, D). An optional non-explosion proof version is available for oxygen, H2S, CO, and CO2 for use in non-hazardous atmospheres. The Direct Connect sensors can be used in two different ways. The sensors can be mounted directly to the controllers as a complete stand alone system, or they can be mounted to explosion proof junction boxes for remote detection. The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors are available for NH3, SO2, PH3, AsH3, and HCN. The Direct Connect sensors can be used either indoors or outdoors. The flame arrestors for the explosion-proof versions utilize a patented coating which make them water repellent. Also, splash guards are available for use in very wet environments. An optional stainless steel junction box is available for corrosive environments. All of the Direct Connect sensors are designed to specifically interface with RKI Beacon 110, 200, and 410 controllers.   Application Petrochemical plants Refineries Gas plants Offshore drilling platforms Water & wastewater treatment plants Pulp & paper mills Gas, telephone, & electric utilities Parking garages Manufacturing facilities Steel Automotive