Hioki 9695-02 50Amp 50 Amp Clamp
Hioki current sensors are best-in-class devices for use with power meters, and PQAs. The 9695-02 is a 50 A AC clamp sensor with voltage output for measuring load current.
CAT III 300V
Key Features
- High ±0.3% accuracy
- For inverter devices or commercial power lines
- For power meters and power loggers (may require the 9219)
- Fits in narrow spaces due to compact design
Rated measurement current | 50 A AC | |||||
---|---|---|---|---|---|---|
Max. measurement current | Continuous 60 A (45 to 66 Hz) | |||||
Output rate | 10 mV AC/ A | |||||
Amplitude accuracy (45 to 66 Hz) | ±0.3 % rdg. ±0.02 % f.s. (*1) | |||||
Phase accuracy | ±2° (45 Hz to 5 kHz) | |||||
Amplitude frequency characteristics | Within ±1% at 40 Hz - 5 kHz (deviation from amplitude accuracy) | |||||
Max. rated voltage to earth | 300 V AC rms or less (Insulated conductor) | |||||
Measurable conductor diameter | φ 15 mm (0.59 in) or less | |||||
Operating temperature and humidity | 0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation) | |||||
Dimensions and mass | 50.5 mm (1.99 in)W × 58 mm (2.28 in)H × 18.7 mm (0.74 in)D, 50 g (1.8 oz) Output terminal : M3 terminal (outside 3 mm, 0.12 inch diameter) Option: Connection cable 9219 (3 m, 9.84 ft length) |