Megger 1004-735 MIT410/2-LG2 (EN ES PT IT) Insulation & Continuity Tester 50/100/250/500/1000V + 600 V CAT IV + PI & DAR with Language Group LG2 - English, Spanish, Portuguese and Italian

(No reviews yet) Write a Review

$1,100.00

Brand: Megger
SKU:: 1004-735
UPC:
Availability:: In Stock
Model No:: MIT410/2

Current Stock:

Quantity:

Adding to cart… The item has been added

Description
0 Reviews

Megger MIT410/2 Offers

MIT410/2 - 50 V, 100 V, 250 V, 500 V and 1000 V + Polarization Index, Dielectric Absorption Ratio.

Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%.

A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are required that do not appear in the standard ranges.

Continuity testing is how significantly faster, and a single auto-ranging 0.01 megohm to 1.0 megohm function replaces the "ohms" and "kOhms" ranges. Retained are the 200 mA and 20 mA test options.

Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating.

Features

Insulation testing up to 1000 V and 200 GΩ range
Stabilized insulation test voltage (New)
Single range, faster continuity testing from 0.01 ohm to 1 megohm (New)
600V Trms AC and DC voltage measurement
Live circuit detection and protection
User variable insulation test voltage from 100V to 1000V (New) depending on model
Test result storage and Bluetooth downloading depending on model
CAT IV 600 & IP54

SPECIFICATION

Insulation test voltage	50 V, 100 V, 250 V, 500 V, 1000 V
Resolution	0.1 kΩ
Short circuit/charge current	2 mA +0% -50% to EN 61557-2 (2007)
Open circuit voltage	-0% +2% ± 2V
Test current	1 mA at min. pass value of insulation to a maximum of 2 mA max.
Leakage	10% ±3 digits
Voltage	3% ±3 digits ±0.5% of rated voltage
Timer control	60 second countdown timer
Guard terminal performance	<5% error at 500 kΩ
Continuity measurement	0.01 Ω to 999 kΩ (0 to 1000 kΩ on analog scale)
Open circuit voltage	5 V ± 1 V
Test Current	200 mA (–0 mA +20 mA) (0.01 Ω to 4 Ω)
Polarity	Single polarity (Default) / Dual polarity (configurable on setup).
Lead resistance	Null up to 9.00 Ω
Voltage range	AC: 10 mV to 600 V TRMS sinusoidal (15 Hz to 400 Hz) DC: 0 to 600 V
Frequency measurement range	15 Hz - 400 Hz
Frequency measurement	±0.5% ± 1digit (100 Hz to 400 Hz)
Capacitance measurement	100 pF to 10 μF
Storage capacity	>1000 test results
Battery life	3000 insulation tests with duty cycle of 5 sec ON /55 sec OFF @ 1000 V into 1 MΩ Charger (Optional): 12-15 V dc (accessory interface)
Temperature co-efficient	< 0,1% per °C up to 1 GΩ, < 0,1% per °C per GΩ above 1 GΩ
Dimensions	Instrument 228 mm x 108 mm x 63 mm (9.00 in x 4.25 in x 2.32 in)
Weight	600 g (MIT400/2), (28.74 oz)

Insulation Resistance Testing

The stabilized insulation test voltage is now accurate to +2% -0%. This compares to the industry standard +20%, providing a more accurate test voltage without the risk of over-voltage damage to circuits or components. The output voltage is maintained between 0 and 2% throughout the test range.

Where a non-standard test voltage is required, a variable range allows the exact test voltage to be selected from 10 V up to 1000 V. Subject to the same stabilized output control.

Applications

Commercial Avionics
Military land, Marine and Air communications
Manufacturing/Production line goods
Electrostatic measurement
Component testing
Battery powered traction and lifting equipment

Write a Review