Megger DLRO100XB LG2-P3 Digital Low Resistance Ohmmeter, 100A, Battery & Mains Powered with Dual Ground, Memory Storage and USB Download + US (NEMA) Mains Plug|Testequipmentusa

Megger DLRO100XB LG2-P3 Digital Low Resistance Ohmmeter, 100A, Battery & Mains Powered with Dual Ground, Memory Storage and USB Download + US (NEMA) Mains Plug

(No reviews yet) Write a Review

$8,140.00

Brand

Megger

SKU:

1004-939

Availability:

In Stock

Description
0 Reviews

DESCRIPTION

DLRO100H LG2-P3 Enables low resistance measurement across multiple applications in areas without access to mains power. The integral Li-ion battery supplies a constant 100A current for up to 200 Manual/Auto tests to enable enhanced productivity in remote locations. Advanced design features ensure the safe operation of the instrument in the most adverse conditions, including a CAT IV 600 VAC / 500 VDC safety rating in accordance with IEC61010.

Features

CAT IV 600 VAC / 500 VDC up to 2000 m, CAT IV 300 V up to 4000 m
Line Powered only
High noise immunity
Smooth DC output
IP54 Lid open, IP65 Lid closed
100A Manual, auto and continuous test
Custom test
Range and test mode rotary switches
Ultra tough outer case construction
Dual Ground with optional clamp
Large, clear LCD
Internal memory storage with USB download capability
Asset tagging
Bluetooth

SPECIFICATION

Measurement range	0.1 μΩ - 1.999 Ω
Resolution	0.1 μΩ
DC output	Smooth DC
IP rating	IP54 Lid open / IP65 Lid closed
Operating temperature	-20°C up to 50°C
Storage temperature range	e -30°C up to 70°C
Humidity	<85% R.H. non-condensing
Battery life	200 single 100 A tests or up to 2x 10 minutes continuous 100 A output
Battery type	User replaceable Li-ion battery pack
Battery charge time	Full charge in 2.5 Hrs from flat
Maximum output voltage	2 V (battery), 3 V (AC)
EMC	IEC61326-1
Safety	IEC61010 CAT IV 600 VAC / 500 VDC up to 2000 m, CAT IV 300 V up to 4000 m
Dimensions	400 x 300 x 200 mm
Weight	7.0 kg (AC Only)

Test Modes

The Manual test mode allows the user to initiate the test procedure once the probes are in contact with the object under test. Once the TEST button is depressed the TEST lamp will illuminate and the instrument will undertake a single test to verify the resistance of the test object.

In Auto mode the user selects the desired current, connects the current test leads and as soon as the potential leads are connected a test will start automatically. To repeat a test, simply break contact with the potential probes and remake contact.

In Continuous mode the user connects the test leads and presses the TEST button, initiating the test procedure. The instrument will continue to test, updating the display after each new test cycle, until the TEST button is pressed or the test procedure times out.

Test Leads

Standard test leads, with separate current and potential, or kelvin, combining both current and potential in one clamp are available as optional accessories in 5m, 10m, and 15m lengths. All test leads are CAT IV 600 VAC / 500 VDC safety rated.

Applications

Power Utilities

Power stations
Distribution
HV substations and switchyards
Wind turbines
Solar

Service Companies

Electrical power utilities
Commercial (3 phase)
Industrial
Wind turbines
Solar

OEMs

Power equipment
Automotive

Plants

Chemical
Refineries
Miscellaneous

Transportation

Airplane maintenance
Airport maintenance
Port
Ship

Write a Review