Megger MIT1525 15 kV Diagnostic DC Insulation Resistance Tester|Testequipmentusa

Megger MIT1525 15 kV Diagnostic DC Insulation Resistance Tester

(No reviews yet) Write a Review

$6,788.25

Brand

Megger

SKU:

MIT1525

Availability:

DISCONTINUED WITHOUT A REPLACEMENT, NO STOCK

Description
0 Reviews

Megger MIT1525 Offers

Ideal for original equipment manufacturers and industrial companies, this tester features a full suite of test modes, onboard memory, and the ability to stream data/download data to a PC/laptop. Offers rapid charge batteries and operation from an ac source if the batteries are dead.

Features

Includes all test modes
Ramp test plus advanced memory functions with recall to screen
RTC for time/dat stamp of results and USB cable interface to PC/PowerDB
Insulation resistance up to 30 TO at 15 kV
IR, Timed IR, DAR, PI, DD, SV and ramp diagnostic tests
High current - 3 mA short circuit current
High noise immunity - 6 mA (15 kV) of noise rejection
Li-ion battery ? up to 6 hours continuous testing at 5 kV with a 100 M load, battery meets IEC 2133
Safety rating: CAT IV 1000 V to 9842.52' (3000 m) - 15 kV
Large LCD display with backlight
Dedicated voltmeter function (30 to 660 V)
Advanced memory, on screen recall and real time clock for date/time stamped results
Download of on-board results via USB interface
Recorded temperature
PowerDB Lite asset management software supplied

Applications

Cables
Transformers
Motors
Generators
Circuit breakers
Bushings

Megger MIT1525 Specifications

AC Voltage (Auto-ranging)	90 to 264 Vrms, 47 to 63 Hz, 200 VA
Test Voltage	Range: 1000 V, 2500 V, 5000 V, 10000 V, 15000 V, user defined test voltage Accuracy: +4%, -0%, ?10 V nominal test voltage at 1 GO load (0 to 30?C) User defined test voltage: 100 V to 1 kV in 10 steps, 1 to 5 kV in 25 V steps, 5 to 15 kV in 25 V step
Resistance Range	10 kO to 15 TO at 5 kV 10 kO to 20 TO at 10 kV 10 kO to 30 TO at 15 kV
Accuracy (68?F [20?C])	?5% from 1 MO to 3 TO: 15 kV ?5% from 1 MO to 2 TO: 10 kV ?5% from 1 MO to 1 TO: 5000 V ?5% from 1 MO to 500 GO: 2500 V ?5% from 1 MO to 200 GO: 1000 V ?20% from 1 MO to 30 TO: 15 kV ?20% from 1 MO to 20 TO: 10 kV ?20% from 1 MO to 10 TO: 5000 V ?20% from 1 MO to 5 TO: 2500 V ?20% from 1 MO to 2 TO: 1000 V
Guard Terminal Performance	Guards out parallel leakage resistance down to 250 kO with a maximum additional resistance error of 1% with a 100 MO load
Short Circuit/Charge Current	3 mA at 5 kV, 10 kV, 15 kV
Insulation Test Alarm	100 kO to 10 GO
Capacitor	Charge: <7.5 s/?F at 3 mA to 15 kV Discharge: <3500 ms/?F to discharge from 15 kV to 50 V
Capacitance	Range: 10 nF to 50 ?F (with test voltage set above 500 V) Measurement accuracy: ?10% ?5 nF
Current	Range: 0.01 nA to 6 mA Accuracy: ?5% ?0.2 nA at all voltages (20?C)
Interference	6 mA from 2100 V to 15 kV
Voltmeter	Range: 30 V to 660 V AC or DC, 45 to 65 Hz Accuracy: ?3%, ?3 V
Timer Range	Up to 99 minutes 59 seconds, 15 second minimum setting
Memory Capacity	5.5 hours logging at 5 sec intervals
Test Modes	IR, IR(t), DAR, PI, SV, DD, Ramp test
Interface	USB type B (device)
Real Time Output	1 Hz output readings (V, I, R)
Display Analog	100 kO to 10 TO
Digital	10 kO to maximum above
Temperature	Operating: -4 to 122?F (-20 to 50?C) Storage: -13 to 149?F (-25 to 65?C)
Humidity	90% RH non-condensing at 104?F (40?C)
Maximum Altitude	9842.52' (3000 m)
IP Rating	IP65 (lid closed), IP40 (lid open)
Safety	CAT IV 1000 V to 9842.52' (3000 m) altitude (meets the requirements of IEC 61010-1)
Battery	Type: 11.1 V, 5.2Ah Li-ion batteries, meets IEC 62133:2003 Life: 4.5 hours (typical) continuous testing at 15 kV with a 100 MO load Charge time: 2.5 hours deep discharge, 2 hours normal discharge
Dimensions	14.2 x 12 x 7.6" (360 x 305 x 194 mm)
Weight	14 lbs (6.5 kg)

What's included with the Megger MIT1525

Insulation Resistance Tester
Calibration Certificate
3 x Lead Sets with Large 15 kV Insulated Clips
Power Lead
USB Cable

Write a Review