Megger MIT420/2 CAT IV Insulation and Continuity Tester with Onboard Memory, PI and DAR, 50V, 100V, 250V, 500V, 1000
(No reviews yet)
Write a Review
Write a Review
Megger
Megger MIT420/2 CAT IV Insulation and Continuity Tester with Onboard Memory, PI and DAR, 50V, 100V, 250V, 500V, 1000
$1,155.00
- Brand
- Megger
- SKU:
- 1006-740
- Availability:
- In Stock
Megger MIT420/2 Description
This insulation tester features a variable range to allow any intermediate voltage from 10 V to 1000 V in 1 V steps, when testing specific test voltages that do not appear in the standard ranges is required. Continuity testing is now significantly faster, and a single autoranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "kOhms" ranges. Retained are the 200 mA and 20 mA test options. The instrument is over-moulded for increased protection and has an IP54 weatherproof rating.
Features
- Designed for Electrical and Industrial testing
- Insulation testing up to 1000 V and 200 GΩ range
- Stabilised insulation test voltage
- Single range, faster continuity testing from 0.01 Ω to 1 MΩ
- Adjustable insulation test voltage from 10 V to 1000 V
- 600 V Trms AC and DC voltage measurement
- Test result storage
- Live circuit detection and protection
- Rechargeable options for mains and car charging
- CAT IV 600 V and IP54
SPECIFICATION
| Test voltage | 50 V, 100 V, 250 V, 500 V, 1000 V |
| Display range | Analogue: 1 GΩ full scale |
| Resolution | 0.1 kΩ |
| Short circuit/charge current | 2 mA +0% -50% to EN 61557-2 (2007) |
| Open circuit voltage insulation | -0% +2% ± 2V |
| Test current | 1 mA at min. pass value of insulation to a maximum of 2 mA max. |
| Leakage | 10% ±3 digits |
| Voltage | 3% ±3 digits ±0.5% of rated voltage |
| Timer control | 60 second countdown timer |
| Continuity measurement | 0.01 Ω to 999 kΩ (0 to 1000 kΩ on analogue scale) |
| Open circuit voltage | 5 V ± 1 V |
| Test current | 200 mA (–0 mA +20 mA), (0.01 Ω to 4 Ω) |
| Polarity | Single polarity (Default) / Dual polarity (configurable on setup). |
| Lead resistance | Null up to 9.00 Ω |
| Voltage range | AC: 10 mV to 600 V TRMS sinusoidal (15 Hz to 400 Hz) DC: 0 to 600 V |
| Frequency measurement range | 15 Hz - 400 Hz |
| Frequency measurement accuracy | ±0.5% ± 1digit (100 Hz to 400 Hz unspecified) |
| Storage capacity | >1000 test results |
| Power supply | 6 x 1.5 V cells type IEC LR6 (AA, MN1500, HP7, AM3 R6HP) Alkaline 6 x 1.2 V NiMH rechargeable cells may be used |
| Battery life | 3000 insulation tests with duty cycle of 5 sec ON /55 sec OFF @ 1000 V into 1 MΩ |
Applications
- Electrical installations
- Cable testing
- Motor testing
- Automotive
- ESD
- Panel building
- Avionics
- Maintenance
0 Reviews Hide Reviews Show Reviews
Megger
Megger MIT430/2 CAT IV Insulation and Continuity Tester with Bluetooth, Onboard Memory, PI and DAR, 50V, 100V, 250V, 500V, 1000
$1,044.75
Product Features: Designed for electrical and industrial testing Performs insulation testing up to 1000 V and 200 Gigaohms range Test ranges extend from 2 gigaohms to 200 gigaohms On-board memory...
Megger
Megger MIT410/2 CAT IV Insulation and Continuity Tester with PI and DAR, 50V, 100V, 250V, 500V, 1000
$1,100.00
Megger MIT420/2 Description The MIT420/2 adds additional features required for engineers working on more demanding applications. Functions such as PI and DAR, capacitance measurement and a greater...
Megger
Megger MIT481/2 Insulation/Continuity Tester with Storage, 50V/100V/250V/500V
$1,113.00
Megger MIT481/2 Insulation/Continuity Tester with Storage, 50V/100V/250V/500V Description
Product Features
Performs insulation testing up to 500 V and 100 Gigaohms range
Three-wire connection...
Megger
Megger MIT485/2 Insulation/Continuity Tester with Bluetooth and Storage, 50V/100V/250V/500V
$1,635.00
Megger MIT485/2 Insulation/Continuity Tester with Bluetooth and Storage, 50V/100V/250V/500V Description The Megger MIT485/2 (1006-758) Insulation and Continuity Tester replaces the original MIT480...
Aemc
AEMC 6529 (2126.55) Digital Megohmmeter, 50V, 100V, 250V, 500V, 1000V, 420k-Ohm, V, Continuity, Alarm and Timer, PI/DAR
$349.00
AEMC 6529 Description
Features
Selectable test voltages 50, 100, 250, 500 and 1000 V
Basic DMM functions; volts, continuity, resistance
DAR and PI ratio test functions
Dual line display to...
Megger
Megger MIT410-TC/3-LG1 (1006-730) Digital/Analog Insulation Tester, 50/100/250V/500V, CATIV 600V
$1,100.00
Product Features Ideal for use within telecommunications industry Allows users to determine the condition of insulation of a twisted copper cable pair Performs insulation testing up to 500 V and 50...
Megohmmeter Model 1060 (Digital, Analog Bargraph, Alarm, Timer, 50V, 100V, 250V, 500V, 1000V, Auto DAR/PI, Res., Continuity, RS-232 w/DataView ® Software, 128kB Memory)
$1,950.00
AEMC Instruments Megohmmeter Model 1060 (Digital, Analog Bargraph, Alarm, Timer, 50V, 100V, 250V, 500V, 1000V, Auto DAR/PI, Res., Continuity, RS-232 w/DataView® Software, 128kB Memory) The...
Megger
Megger MIT400 2, Insulation Tester, 1000V, 200G?, CAT IV
$945.00
Product Features Designed for electrical and industrial testing Test voltages: 250V, 500V, 1000V Test ranges extend from 2 giga-ohms to 200 gigaohms Stabilized insulation test voltage allows for...
Megger
Megger 1004-739 MIT420/2-LG2 (EN ES PT IT) Insulation & Continuity Tester 50/100/250/500/1000V + 600 V CAT IV + PI & DAR, variable voltage, storage/recall with Language Group LG2 - English, Spanish, Portuguese and Italian
$1,155.00
Megger MIT420/2 Description This insulation tester features a variable range to allow any intermediate voltage from 10 V to 1000 V in 1 V steps, when testing specific test voltages that do not appear...