Meyer MG2-25 Series Class X 25 pc Gage Set Class X MG-25 Series

• Each set contains 25 pieces of Class X tolerance (.00004”) gage pins.
• Traceable to NIST
• Choice of two tolerances: Plus (+.00004”) or Minus (-.00004”)
• Sets consist of a center nominal size, and 12 gages larger in .0001” steps and 12 gages smaller in .0001” steps. Metric sets available in 0.01mm increments.
• Each gage is inspected and has a 2 microfinish or better.
• Heat treated and through hardened to 60-62 Rockwell C
• All pin gages over .060” or 1.51 mm are laser marked with size direction of tolerance and serial number for traceability.

Features:

• Used as masters to calibrate measuring equipment and check linearity of comparators, micrometers, and calipers.
• These ‘Tenth Step” gage sets have unlimited applications, such as quality control inspection, prototype work and production layout.
• Inspectors select from the range of pins to find the size of a hole or slot.
• These round masters simulate a cylindrical part which, unlike flat blocks, can detect uneven wear on the tips of micrometers and calipers.
• The thin “line” of contact detects uneven face wear better than flat gage blocks with large contact area.