Megger MIT515-US Insulation Tester, 10 Teraohms Resistance, 5kV Multi-Range Test Voltage 1001-936

(No reviews yet) Write a Review

$4,765.00

Brand: Megger
SKU:: 1001-936
UPC:
Availability:: In Stock
Model No:: MIT515-US

Current Stock:

Quantity:

Adding to cart… The item has been added

Description
0 Reviews

Megger MIT515 Description

Features

Industry best guard terminal accuracy
Smaller size and lightweight allows easier transport and use without compromising performance
Compact and lightweight for easy transport and use
Auto IR, DAR and PI
Unique dual case design provides additional user protection
Lithium-ion battery - extended capacity, rapid charge
Advanced memory with time/date stamp
CATIV 600V safety rating on all terminals

Megger MIT515 Specifications

Analog Insulation Range	100 kΩ to 10 TΩ
Digital Insulation Range	10 kΩ to 10 TΩ
Test Voltages	250 V, 500 V, 1000 V, 2500 V, and 5000 V
User Defined Test Voltages	100 V to 1 kV in 10 V Steps 1 kV to 5 kV in 25 V Steps
Accuracy (23°C)	±5% to 1 TΩ, ±20% to 10 TΩ
Voltage Output Accuracy (0 to 30°C)	4 to 0% ±10 V of nominal test voltage at 1 GΩ load
Voltmeter Range	30 to 660 V ac or dc, 50/60 Hz Accuracy: ±3% ±3 V Frequency Range: 45 Hz to 65 Hz
Short Circuit Current	3 mA Nominal, Max. Power on All Loads Outperforming Many 5 mA Testers
Insulation Alarm	100 kΩ to 1 GΩ
Current Measurement	Range: 0.01 nA to 6 mA Accuracy: ±5% ±0.2 nA at All Voltages
Capacitance Range Above 500 V	10 nF to 25 µF (Dependent on Measurement Voltage) Accuracy (23°C): ±10% ±5 nF
Capacitor Charge	<3 s per µF at 3 mA to 5 kV
Capacitor Discharge	<250 ms/µF to Discharge from 5000 V to 50 V
Timer Range	Up to 99 Minutes, 15 Seconds Minimum Setting
Memory Capacity	5 1/2 Hours Continuous Logging Every 5 Seconds or 33 Logged PI Tests or 350 Logged IR Tests
Industry-Standard Tests	IR, IR(t), DAR, PI
Interface	USB Type B (Device)
Real Time Output	USB, 1 Reading/Second (Voltage, Current and Resistance)
Interference Rejection	1 mA per 250 V up to a maximum of 3 mA
Guard Terminal	2% Error Guarding 500 kΩ Leakage with 100 mΩ Load
Voltage Input Range	85 to 265 V, 50/60 Hz, 60 VA
Battery Type	Lithium-Ion, 11.1 V, 5.2 A Hour, Meets IEC 62133:2003
Battery Life	Typical Capacity 6 Hours Continuous at 5 kV with a 100 MW Load
Battery Charge Time	2.5 Hours from Deep Discharge, 2 Hours Normal Discharge 30 Minutes Quick Charge: 1 Hour Operation at 5 kV, 100 MW
Safety	Meets the Requirements of IEC61010-1 CAT IV 600 V Default Voltmeter Warns Operator of Applied Voltage Above 50 V
EMC	Meets the requirements of IEC61326-1
Ingress Protection	IP65 (Lid Closed) IP40 (Lid Open)
Temperature Range	Operating: -4 to 122°F (-20 to 50°C) Storage: -13 to 149°F (-25 to 65°C)
Humidity Range	90% RH @ 104°F (40°C)
Altitude	3000 m, CAT rating maintained >2000 m* (*test load connected)
Dimensions	12 x 11 x 7" (315 x 285 x 181 mm)
Weight	10 lb (4.5 kg)

Applications

Testing the Insulation of High or Low Voltage Electric Equipment
Generators
Motors
Transformers
Cables
Switchgear
High-Voltage Power Cables
High-Voltage Buses
Large Motor/Generator Windings
Line and Substation Transformers
Spot Tests
Stepvoltage Tests
Dielectric Discharge Tests
Ramp Tests
Dielectric Absorption Tests
Acceptance Testing at Installation to Check Conformance to Specifications
Routine Preventive/Predictive Maintenance Testing After Installation
QA Testing as Part of the Manufacturing Process
Diagnostic Testing to Isolate Faulty Components for Repair
Rotating Machinery
Insulation Resistance of Armature and Field Windings

Write a Review