Mitutoyo 02AGD140 CALIBRATION GAGE SET FOR LSM506|TestEquipmentUSA

Mitutoyo 02AGD140 CALIBRATION GAGE SET FOR LSM506

(No reviews yet) Write a Review

$752.40

Brand

Mitutoyo

SKU:

02AGD140

Availability:

In Stock

Description
0 Reviews

Mitutoyo Bench-Top Type Laser Scan Micrometer LSM-9506 with Display

Series 544-Bench Top Type Non-contact Measuring System

Optional Accessories:

02AGD170 - Calibration gage set (?1.0mm, ?60mm)
02AGD680 - Adjustable Workstage
02AGD580 - Center support**
02AGD590 - Adjustable V-block**
936937 - SPC output cable (1m)
937179T - Footswitch
264-012-10 - USB Input Tool for spreadsheets (SPC cable also required)

** Use with an adjustable workstage.

** Determined by the value for ?2? at the measurement interval of 0.32 sec.
** At the center of the measuring region
** An error due to workpiece shift either in the optical axis direction or in the scanning direction. L= Distance between the center of workpiece and the center of optical axis (in mm or inches)
** The area given by "measuring range on the optical axis" x "measuring range in the scanning direction"
** FDA Class II (544-116-1A) semiconductor laser for scanning (Maximum power: 1.0mW)

QUICKTOOL is a free software program that makes programming the LSM-6200 quick and easy. Basic data acquisition is also possible. Included as standard accessory. (Connecting cables to PC are optional)

Specifications:

Model	LSM-9506
Order No	544-116-1A
Measuring Range	0.02 - 2.36" / 0.5 - 60mm
Resolution	0.000002 - 0.005" / 0.00005 - 0.1mm
Repeatability*1	0.00003"-0.6um
Accuracy*2 (20?C)	Linearity (2) ? .0001in (?2.5?m) The optical axis direction ? .0001in (?2.5?m) The scanning direction ?(.00008+L/10000)in [L:inch] (3) ?(2.0+L/10)?m [L:mm] (*3)
Positional error*3 (optical axis/scanning direction)	?2.5?m (?.0001") L: Displacement between workpiece center and optical axis center
Measuring Area*4	0.02 - 2.36" / 5 - 60mm
Scanning Rate	1600 per sec
Laser wavelength	650nm (Visible)*5
Laser scanning speed	226m/s (8900" / s)
Display Unit	16-digit dot matrix (upper column) + 7 segment 11-digit (lower column),guidance LEDs
Standard interface	RS-232C, Digimatic code output unit (1ch)
Optional interface	No
Data Output	RS-232C,VO Analog Interface,SPC
Power Supply	AC100V to 240V, 50/60Hz, 40VA
Operating Enviorment	0 to 40?C, RH 35 to 85% (no condensation)

View all of the Optional Accessories for Laser Scan Micrometers

Write a Review