Description
This V-Anvil Micrometer helps you measure cutting tools and taps.It offers the following benefits:
- It measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes.
- V-anvils with a centreline groove are available for measuring the pitch diameter of taps by the single-wire method.
Specification
| Inch-Metric: | Metric |
| Range: | 115 - 130 |
| Graduation: | 0,01 mm |
| Maximum Permissible Error J MPE: | ?8 ?m |
| Digital/Analog: | Analog |
| Measuring face: | Prism angle 60?/108? |
| Measuring spindle: | With spindle lock, ?6,35 mm, spindle pitch 0,75 mm |
| Scale: | Thimble and sleeve satin chrome finish, ?18 mm |
| Measuring force: | 5 - 10 |
| Setting standard: | 167-335 ? 115 mm |
| Delivered: | Including box, setting standard, key |
| Remarks: | - |
| Mass: | 2080 |
0 Reviews Hide Reviews Show Reviews
Mitutoyo
Mitutoyo 114-204 2.3-25/.01MM V-ANVIL MICROMETER
$525.60
DescriptionThis V-Anvil Micrometer helps you measure cutting tools and taps.It offers the following benefits: It measures the outside diameter of cutting tools (such as taps, reamers, end mills)...
Mitutoyo
Mitutoyo 114-165 MIC, V-ANVIL, 5MM - 25MM, 0.01MM
$443.70
DescriptionThis V-Anvil Micrometer helps you measure cutting tools and taps.It offers the following benefits: It measures the outside diameter of cutting tools (such as taps, reamers, end mills)...
Mitutoyo
Mitutoyo 114-202 MIC, V-ANVIL, 0.093-1", 0.0001"
$525.60
DescriptionA Mitutoyo non-digital micrometer provided with a V-shaped anvil to enable measurement of 3-flute cutting tools, such as taps and reamers. A ratchet stop guarantees repeatable measurement...
Mitutoyo
Mitutoyo 115-218 75-100/.01MM TUBE MIC
$175.50
Description This Tube Micrometer allows you to measure curved surfaces such as the wall thickness of tubes, bearings and rings. Features Digital/Analog:
Mitutoyo
Mitutoyo 115-115 0-25/.01MM TUBE MIC W/S A
$136.80
DescriptionA Mitutoyo non-digital tube micrometer equipped with a spherical anvil for making wall thickness measurements on tubes and pipes. A ratchet stop guarantees repeatable measurement...
Mitutoyo
Mitutoyo 115-216 25-50/.01MM TUBE MIC W/SA
$158.00
Description A Mitutoyo non-digital tube micrometer equipped with spherical anvil and spindle tip for making wall thickness measurements on tubes and pipes. A ratchet stop guarantees repeatable...
Mitutoyo
Mitutoyo 115-215 0-25/.01MM TUBE MIC W/SA
$152.00
Description A Mitutoyo non-digital tube micrometer equipped with spherical anvil and spindle tip for making wall thickness measurements on tubes and pipes. A ratchet stop guarantees repeatable...
Mitutoyo
Mitutoyo 118-114 0-25/.01MM DEEP THROAT MIC S.A.
$246.60
DescriptionA Mitutoyo non-digital micrometer provided with a deep frame to enable measurement of sheet metal thickness farther from the edge of a sheet than is possible with a standard micrometer. A...
Mitutoyo
Mitutoyo 129-114 0-75/.01MM DEPTH MIC B-100
$180.90
Mitutoyo 129-114 Offers?The Mitutoyo 129-114 Depth Micrometer with interchangeable rods creates accurate measurements of smaller objects. The ratcheting process allows it to exert a constant...