Mitutoyo 519-562A MU-CHECKER M-562

Mitutoyo 519-562A Offers

This instrument uses a differential inductance displacement sensor energized by a 5kHz AC exciting voltage applied across two identical series-connected coils, L1 and L2. An iron core connected to the stylus moves close to both cores and varies the impedance of each coil depending on its position, and the voltage at the junction between the coils varies as the impedance difference.

Two resistors, R1 and R2, form a bridge circuit with the coils and the bridge output voltage drives electronic amplification and conditioning circuits to provide a voltage signal proportional to displacement of the stylus.

Features

• Digital display
• Calculation mode ±A, ±B, and ±A±B
• Can connect 2 probes to the unit at a time
• The EV-16A allows 6 probes to be connected simultaneously to one unit
• The use of the RS link enables easy construction of a multi-point measuring system that allows a maximum of 10 units (60 probes)
• I/O outputs such as RS-232C, BCD, tolerance judgment and segment are selectable
• Peak measurement and arithmetic operation between axes (in the same unit) are also possible in addition to normal measurement for each axis

Major Functions

• External control (zero-setting, presetting, etc.)
• Direction switching
• Error messaging
• Tolerance judgment output
• Various data output
• Peak measurement (maximum value, minimum value, runout)

Applications

• Measuring the inclination of a pin
• Measuring the inside width of a wheel
• Measures the thickness of rolled sheet with the 519-521 Pivot Bearing Lever Head Probe
• Measures the maximum runnout of the distortion of a core with the 519-521 Pivot Bearing Lever Head Probe
• Measures the pitch of HDD head components with the 519-521 Pivot Bearing Lever Head Probe
• Measures the inside width of a wheel with the 519-521 Pivot Bearing Lever Head Probe
• Measure the pitch and runout of slitter blades with the 519-521 Pivot Bearing Lever Head Probe

Electronic Gaging Systems

Suitable for a variety of applications from inspection rooms to production lines, the 519 series high-accuracy Mu-Checker electronic gaging systems is adaptable based on customer demands.

High-resolution lever-head probes allow multi-point measurements of small parts, flatness and straightness measurement on X/Y table, as well as runout measurement of shafts. The cartridge head-type is easily built into equipment because of its compact shape. Probes are offered with a standard measuring force of 0.2N, or a low measuring force of 0.02N. Optional styli, extension rods and brackets are available.

Both digital and analog models offer zero setting with the touch of a button. Additional models allow for multi-probe measuring systems.

Mitutoyo 519-562A Specifications

What's included with the Mitutoyo 519-562A

• Mitutoyo 519-562A Mu-Checker Electronic Micrometer with Digital Display, Differential