Mitutoyo 543-351,"INDICATOR, DIGIMATIC, 12.7MM/.5", SIGNAL TYPE, IN/MM (ISO/JIS), LUG
$611.80
- Brand
- Mitutoyo
- SKU:
- 543-351
- Availability:
- In Stock
Description
This is an externally-powered Digimatic Indicator with a N-ch open drain NG, OK, +NG output.
- Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54)
- Measures MAX/MIN/RANGE (run-out value).
- Saves three different Preset and Tolerance settings.
- Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE)
- Calculation function Ax. Coefficient A freely definable, x = displacement of the plunger
- Analogue bar graph in the display (12 different scales switchable)
- GO/±NG tolerance judgment function
Features
PRESET 3x: | Yes
|
Digital/Analog: | Digital
|
Inch-Metric: | Inch/Metric
|
No. Lug back plate: |
|
Range: | 0.5"/12.7 mm
|
Range: | 0,5" Inch
|
Digital step: | 0,00005"/0,001 mm
|
Hysteresis: | 0,0001"/0,002 mm
|
H MPE (Hysteresis): | 0,0001"/0,002 mm
|
R MPE (Repeatability): | 0,0001"/0,002 mm
|
Measuring force: | ?2,5 N
|
Type: | EN ISO Standard
|
Protection: | IP54
|
Display: | LCD, character height 8 mm
|
Max. response speed: | Unlimited
|
Measurement frequency (MAX/MIN/RANGE): | Standard mode: 100 times/s
(plunger speed max. 0.1mm/s for peak measurement) |
Alarm: | Counting value composition error, overflow error, tolerance limit setting error
|
Stem Ø: | 8 mm
|
Contact point: | Carbide ball, thread M 2.5 x 0.45 mm
|
Power supply: | 5 - 24 V DC / 100mA (max)
|
Delivered: | With signal cable 4 m. One end is fixed to the main unit. no connector is supplied for the other end.
|
ON/OFF: | yes
|
Signal output: (+NG, OK, -NG): |
Yes
|
Signal input: No-voltage input, (PRESET_RECALL/ZERO, HOLD_RESET): |
Yes
|
MAX/MIN/RANGE: | yes
|
ABS / INC (INC ZERO): | Yes
|
Function lock: | yes
|
GO/±NG judgement via LED: | Yes
|
GO/±NG judgement: | yes
|
Calculation function (with formula): | yes
|
Counting direction switchable: | yes
|