PIE 525B Automated RTD & Thermocouple Calibrator. Comes with rubber boot, hands free carrying case, test leads and NIST cert.

Description 525B PIE RTD & Thermocouple Calibrator 525B Thermocouple & RTD Calibator: PIE is pleased to introduce the New Model 525B which replaces the PIE Model 525. This moves our Dual Thermocouple & RTD calibrator to the PIE Evolution enclosure with a rubber boot, tilt stand, 4 batteries and backlit display. Not only did we move the product into the new enclosure, we made a number of other improvements! Increased number of T/C types from 10 to 14 Added RTD types for Platinum 10, 50, 200 & 500 Ohm for the 1.3850 (IEC 751/DIN) curve More accurate & stable cold junction compensationNIST Traceable Cold Junction Sensor in isothermal block Secondary displayShows millivolts and cold junction temperature while displaying thermocouple temperature and shows ohms while displaying RTD temperature Troubleshoot RTD Sensors & InstrumentsAutomatic detection of 2, 3 or 4 wire connections indicates when individual wire connections are open. Verify proper instrument operation by measuring the excitation current 525B Features: Calibrate T/C instruments to 0.1 & 0.01 °F & °CTypes J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P (Platinel): -13.000 to 80.000 mV   Calibrate RTD instruments to 0.1 & 0.01 °F & °CPt 10, 50, 100, 200, 500 & 1000 Ohm (3850)Pt 100 Ohm (alpha=3902, 3916, 3926)Cu 10 & 50 Ohm and Ni 120 Ohm   Calibrate with ConfidenceResolution to 0.01 °F & °C; accurate to 0.2°Cold Junction Sensor accurate to 0.05°C   Verify Heat Treating Uniformity Survey Recorders and perform System Accuracy TestsThe PIE 525B is capable of meeting the requirements of an AMS 2750 Field Test Instrument when certified by an accredited laboratory.   Troubleshoot RTD Sensors & InstrumentsAutomatic detection of 2, 3 or 4 wire connections indicates when individual wire connections are open. Verify proper instrument operation by measuring the excitation current.   Faster CalibrationsInstantly select three outputs with EZ-CHECK switchEasily find trip points with two speed EZ-DIAL knob & Automatic Stepping   Easily Change T/C and RTD Types & ScaleDouble click to select T/C or RTD type & °F & °C   Use in the Plant, Field or ShopIncludes Rubber Boot and mV Test LeadsLow profile switches resist accidental damageBrass screws for T/C wires plus mini T/C socket   Easy-to-Read DisplayTurn on the backlight to read in dark areas of the plant   Simple €œNo Tool€ Battery ChangesFour inexpensive batteries   Verify Resistance, Cold Junction Temperature & OutputSecondary Display of Resistance for RTDs and compensated millivolt setting and cold junction temperature for T/C.