PIE 820PM Panel Mount PIE 820 multifunction calibrator. Comes with ACadapter, mounting plate, screws and NIST cert.

Calibrator functions include: Calibrate milliamps and voltageSource 0.00 to 24.00 mA, 0.00 to 10.25 VDC and 0.00 to 80.00 mVRead to 24.00 mA, 00.00 to 10.,25 VDC, 0.0 to 60.0 VDC, 00.00 to 80.00 mVSimulate 2 Wire transmittersPower up transmitters and loops with built in 24 V power supplySimplify HART hook ups with built in 250 ohm resistor Calibrate directly in temperature (°C & °F)Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II)RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)Copper 10 & 50 Ohm, Nickel 110 and 120 OhmResistance up to 4010 ohms Checkout flow and vibration systemsSource & read frequency to 2000 CPM (Counts-Per-Minute), 999.99Hz, 9999.9 Hz, 20.000 kHz Source pH signals to calibrate pH transmitters and instrumentsSource from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to +414.12 to -414.12 mV Measure pressure with optional pressure modules32 modules for gauge, differential, compound and absolute pressure Two isolated channels allow you to calibrate transmitters, PLC and other instruments with one unit Calibrator features include: Value added troubleshooting features of the PIE 830PMPatented diagnostics including Current Leak detection;  LOOPSCOPE which indicates loop current, voltage and resistanceAuto detection of RTD connectionsAbility to operate as an Isolated Transmitter Technician friendly operationIntuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as our hand held models Quickly set any three outputs plus automatic stepping & rampingSet any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK switchChoose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of spanSelect RAMP to smoothly increase and decrease the output between Zero and SpanSet step/ramp time to match your system from 5, 6, 7, 8, 9, 10, 15, 20, 25, 30 and 60 seconds Easily recall stored valuesUse the EZ-CHECK switch to recall the HI and LO values automatically stored when in READ mode