RKI 72-PAA-C GX-3R Pro,72-PAA-C 5 gas, LEL / O2 / combo H2S & CO / ppm CO2 with 100-240 VAC charger|TestEquipmentUSA

RKI 72-PAA-C GX-3R Pro,72-PAA-C 5 gas, LEL / O2 / combo H2S & CO / ppm CO2 with 100-240 VAC charger

(No reviews yet) Write a Review

$1,380.00

Brand

RKI Instruments

SKU:

72-PAA-C

Description
0 Reviews

Description

Equipped with Bluetooth wireless communication, this gas monitor can display direct gas readings from the instrument to a phone app and send text or email messages by programming the automatic notifications.

In addition, this monitor flashes its three LED lights every 30 seconds in the following conditions; if this monitor has not been bump tested, if calibration is due, or if there was a gas alarm event. The three LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved, and the 30-second interval is adjustable.

Features

Smallest and lightest gas monitor
Simultaneous detection of confined space and toxic/IR gases
Simple two-button operation
Non-compliance indicator
Alarms: Audible, visual, and vibration
Three user adjustable alarm levels
Panic alarm
Man down alarm
Impact resistant body
Large full dot, auto-backlit display with auto-rotation
Stealth mode for law enforcement
Field replaceable sensors and filters
Water and dust resistant design, IP66/68

Applications

Personal monitoring
Confined spaces
Refineries/petrochemical
Utilities
Oil and gas
Water/wastewater
Fire services
Construction

Specification

Gas Detected
Carbon Monoxide (CO)	Sensor slot: 1 Detection principle: EC Detection range (increments): 0 to 2000 ppm (1 ppm) Accuracy: ±5% of reading or ±5 ppm CO Preset alarms: A1: 25 ppm A2: 50 ppm A3: 1200 ppm STEL: 200 ppm TWA: 25 ppm
H₂S	Sensor slot: 1 Detection principle: EC Detection range (increments): 0 to 200 ppm (0.1 ppm) Accuracy: ±5% of reading or ±2 ppm H₂S Preset alarms: A1: 5 ppm A2: 30 ppm A3: 100 ppm STEL: 5 ppm TWA: 1 ppm
Combustible Gases (Methane as Standard)	Sensor slot: 2 Detection principle: Catalytic combustion Detection range (increments): 0 to 100% LEL (1% LEL) Accuracy: ±5% of reading or ±2% LEL Preset alarms: 1st: 10% LEL 2nd: 25% LEL 3rd: 50% LEL Over: 100% LEL
General Specifications
Display	Full dot LCD with auto-backlight and autorotation
Sampling Method	Diffusion sampling standard (hand aspirator or clip-on motorized pump optional)
Alarm Types	Gas alarm: 2 increasing alarms, STEL, TWA, over scale alarm, O₂ decreasing/increasing Trouble Alarm: Sensor disconnection, low battery, circuit error, calibration range error, calibration or bump due alarm Man down alarm Panic alarm
Display of Alarm	Gas alarm: Flashing LED's, continuous buzzer (100 db at 11.8" or 30 cm), flashing gas value, vibration Trouble alarm: Flashing LED's, intermittent buzzer (95 db at 11.8" or 30 cm), display of error message
Operating Conditions (Continuous Environment)	Temperature: -4 to 122°F (-20 to 50°C) Humidity: 10 to 90% RH, non-condensing
Operating Conditions (Temporary Environment)	Temperature: -40 to 140°F (-40 to 60°C) Humidity: 0 to 95% RH, non-condensing
Response Time	Within 30 seconds (T90)
Power Source	Configuration: 4-gas + EC, 4-gas + IR Li-ion: 25 hours, 16 hours Alkaline: 16 hours, 7 hours
Case Material	Explosion proof, dust and water resistant to IP66/68 (2 m,1 h) approval Drop height 23' (7 m)
Bluetooth Communication	BLE: with iOS and Android phone app: RK Link
Data Logging	User ID Station ID Calibration and bump test history Alarm events and trends
Safety Design / Approvals	ATEX CSA
Dimensions	2.9 x 2.6 x 1.06" (approximately 73 x 65 x 26 mm)
Weight (with Rubber Boot)	4.58 oz (approximately 130 g)

Write a Review