RKI 724-068-03 EAGLE 2 for CH4 (100% LEL / 100% volume (IR) autoranging) / O2 / H2S / CO2 5% volume (IR)|Tesequipmentusa

RKI 724-068-03 EAGLE 2 for CH4 (100% LEL / 100% volume (IR) autoranging) / O2 / H2S / CO2 5% volume (IR)

(No reviews yet) Write a Review

$4,195.00

Brand

RKI Instruments

SKU:

724-068-03

Description
0 Reviews

Description

With easy access to a variety of controls and two user-adjustable alarm levels, this multi-gas detector is ideal for catalyst operations at refineries.

Features

Infrared (IR) sensor for % LEL CH4: Operates without the presence of O₂ (unlike traditional catalytic sensors)
Inert mode monitors for rising O₂ levels
User select "Normal" or "Inert" mode
Preset alarm values for each mode type
External high capacity dust filter
Multilingual (five languages)
Powerful long-life pump up to 125 (38 m) range
Low flow pump shut off and alarm
Alkaline 18 hours or NiMH 20 hours capability
Password protection
Data logging standard
Auto calibration / single gas calibration
Internal hydrophobic dust filter
External probe with hydrophobic filter
Ergonomic RFI / EMI / chemical / weather resistant enclosure
Intrinsically safe design, CSA approval

Specification

Display	3 display modes: display all gases, large font-autoscroll, or large font-manual scroll Polyurethane protected overlay Backlight illuminates for alarms and by demand, with adjustable time
Sampling Method	Powerful, long-life internal pump (over 6000 hours) can draw samples over 125' (38 m) Flow rate approximately 2.0 SCFH
Alarms	2 alarms per channel plus TWA and STEL alarms for toxics The two alarms are fully adjustable for levels, latching or self reset, and silenceable
Alarm Method	Buzzer 95 dB at 11.8" (30 cm) Four high intensity LEDs
Controls	4 external glove friendly push buttons for operation, demand zero, and auto calibration Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features
Enclosure	Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend Can operate in 2" (5 cm) of water without leakage Ergonomically balanced with rugged top mounted handle Water and dust resistant equivalent to IP64
Language	Readout can display in 5 languages (English, French, German, Italian, or Spanish)
Continuous Operation (At 70°F (21.11°C))	18 hours using alkaline batteries, or 20 hours using NiMH
Power Source	4 Alkaline or NiMH, size C batteries (Charger has Alkaline recognition to prevent battery damage if charging is attempted with Alkalines)
Operating Conditions	Temperature: -4 to 122°F (-20 to 50°C) Humidity: 0 to 95% RH, non-condensing
Environmental	IP64 water resistant
Response Time	30 seconds to 90% (for most gases) using standard 5' (1.5 m) hose
Safety Rating	Intrinsically Safe: Class I, Groups A, B, C, D Approvals: CSA and CE

Write a Review