RKI 725-101-P2-50 EAGLE 2 for LEL & PPM / O2 / H2S / CO / VOCs (0 - 2,000 ppm, PID), 58AL H2S/CO/O2/CH4, 103L 100 ppm isobutylene/Air, dem flow reg, tubing, and padded carrying case
$4,995.00
- Brand
- RKI Instruments
- SKU:
- 725-101-P2-50
Description
Featuring a rugged enclosure, this multi-gas detector is water and dust resistant.
Features
- Heavily protected from environmental conditions by a weather-proof, chemical resistant RFI/EMI coated high impact polycarbonate/PBT blend enclosure
- Can function in 2 inches of water without leakage
- Can draw samples for up to 125'
- The pump features a low flow auto shut off and alarm
- The unit is multilingual with 5 different language preferences
- Features an alkaline battery life of 18 hours or a NiMH life of 20 hours
- The unit features an automatic calibration option and a single gas calibration option
- An infrared sensor is available for Co2, % LEL CH4, % Volume CH4, % LEL HC, and % Volume HC
- Thermal conductivity sensors are available for % Volume H2 and % Volume CH4
- The unit is also compatible with the smart plug and play toxic sensors for the detection of NH3, AsH3sub>, CI3, HCN, PH3, and SO3
Specification
Enclosure | Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend Can operate in 2.0" of water without leakage. Ergonomically balanced with rugged top mounted handle. Water & dust resistant equivalent to IP64 |
Detection Principle | Catalytic combustion, electrochemical cell, galvanic cell, infrared, photoionization detector, and thermal conductivity |
Sampling Method | Powerful, long-life internal pump (over 6000 hours) can draw samples over 125' Flow rate approximately 2.0 SCFH |
Display | 3 display modes: All gases, large font-autoscroll, or large font-manual scroll |
Backlight | Illuminates for alarms and by demand, with adjustable time |
Language | English, French, German, Italian, and Spanish |
Alarms | 2 Alarms per channel plus TWA and STEL alarms for toxics |
Alarm Method | Buzzer 95 dB at 30 cm, four high intensity LEDs |
Power Source | 4 alkaline or NiMH, size C batteries |
Operating Temperature and Humidity | -4 to 122°F (-20 to 50°C), 0 to 95% RH, non-condensing |
Response Time | 30 Seconds to 90% (for most gases) using standard 5 ft hose |
Safety Rating | Intrinsically Safe, Class I, Groups A, B, C, D. Approvals: CSA / CE |