Loading Loading... Please wait...
  • Request for Quote
  • 713-904-4604
  • My Account
  • Certificates
Free Shipping on Orders Above $250*** Covid 19 Awareness...Use your mask!
  • Yes

AEMC AC Current Probe Model MN213


Product Description

AEMC AC Current Probe Model MN213 The MN213 is a general purpose AC current probe designed for DMMs and other measuring instruments with current input. It has a 1000:1 ratio and an output of 1mA per Amp in the primary (inside the jaw). The MN213 has integral 5 ft (1.5m) leads terminated by shrouded banana plugs. The MN213 has protective diodes across the output that limit the voltage in open secondary situations. Maximum Conductor Size 0.78" (20mm), bus bar 20x5mm Current Range 200Arms AC Measurement Range 0.5 to 240A Output 5ft (1.5m) lead with 4mm safety banana plug Transformation Ratio 1000:1 Output Signal 1mA/A AC (200mA @ 200A) Accuracy 50/60Hz 1%  ± 0.5A @ 200A Frequency Range 40Hz to 10KHz Phase Shift at 50Hz 2.5° @ 200A Open Secondary Voltage Limited to <6V with diodes Load Impedance 1Ω, 10Ω max with derating Overload 240A for 10 min ON, 30 min OFF Dimensions  (H x W x D) 5.47 x 2.00 x 1.18” (139 x 51 x 30mm) Weight With 24” (610mm) Sensor 6.3 oz (180g) Operating Temperature 14° to +131°F  (-10° to +55°C) Storage Temperature -40° to +158°F  (-40° to +70°C) Operating Humidity 90% RH Pollution Degree 2 Ingress Protection (Ip) IP40 EMC EN 61326-1 Safety Compliance EN/IEC 61010-1 600V CAT III,EN/IEC 61010-032

Back to Top