Loading Loading... Please wait...
  • Request for Quote
  • 713-904-4604
  • My Account
  • Certificates
Free Shipping on Orders Above $250*** Covid 19 Awareness...Use your mask!
  • Yes

AEMC AC Current Probe Model MN307


Product Description

AEMC AC Current Probe Model MN307 The MN307 is designed for low AC current measurements up to 10A, such as secondary of CTs or even small motors and appliances. It offers a higher voltage output of 100mV per Amp (1VAC @ 10AAC) for enhanced sensitivity at lower levels, while offering a high crest factor at full range. The MN307 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs. Maximum Conductor Size 0.78" (20mm), bus bar 20x5mm Current Range 10Arms AC Measurement Range 0.1 to 12A Output 5 ft (1.5m) lead with 4mm safety banana plug Transformation Ratio N/A Output Signal 100mV/AAC (1V @ 10A) Accuracy 50/60Hz 1%  @ 10A Frequency Range 40Hz to 10KHz Phase Shift At 50Hz 2.5° @ 10A Open Secondary Voltage N/A Load Impedance 1MΩ Overload 20A continuous Dimensions  (H x W x D) 5.47 x 2.00 x 1.18” (139 x 51 x 30mm) Weight 6.3 oz (180g) Operating Temperature 14° to +131°F  (-10 to +55°C) Storage Temperature -40° to +158°F  (-40° to +70°C) Operating Humidity 90% RH Ingress Protection (Ip) IP40 Pollution Degree 2      EMC EN 61326-1 Safety Compliance EN/IEC 61010-1 600V CAT III,EN/IEC 61010-032


Back to Top