AEMC AC Current Probe Model MN373

AEMC AC Current Probe Model MN373 The MN373 is a dual range current probe designed to measure low current (to 200A) with high accuracy and phase shift. The MN373 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs. Maximum Conductor Size 0.78" (20mm), bus bar 20x5mm Current Range 150Arms AC Measurement Range 0.01 to 2.4A & 0.1 to 200A Output 5 ft (1.5m) lead with safety 4mm banana plug Transformation Ratio N/A Output Signal 1000mV/AAC  (2V @ 2 A);  10mV/AAC (1V @ 100A) Accuracy 50/60Hz 1% @ 2A & 1% @ 80A Frequency Range 40Hz to 10KHz Phase Shift At 50Hz 2° @ 80A Open Secondary Voltage N/A Load Impedance 1MΩ Overload 240A for 10 min ON, 30 min OFF Dimensions  (H x W x D) 5.47 x 2.00 x 1.18” (139 x 51 x 30mm) Weight 6.3 oz (180g) Operating Temperature 14° to +131°F  (-10° to +55°C) Storage Temperature -40° to +158°F  (-40° to +70°C) Operating Humidity 90% HR Pollution Degree 2      Ingress Protection (Ip) IP40 EMC EN 61326-1 Safety Compliance EN/IEC 61010-1 600V CAT III,EN/IEC 61010-032