AEMC AC Current Probe Model SR651

AEMC AC Current Probe Model SR651 The SR651 is a general purpose 1000AAC current probe designed for use with DMMs, loggers and other instruments that have voltage inputs. It has a voltage output proportional to the rate of 1mV per amp to the current measured in the jaw. The SR651 has jack output terminations that accept 4mm banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift are important. Maximum Conductor Size 2.05" (52mm) Current Range 1000Arms AC Measurement Range 0.1 to 1200A Output Two standard safety banana jacks (4mm) Transformation Ratio 1000:1 Output Signal 1mVAC/A AC (1V @ 1000A) Accuracy 50/60Hz 0.5% @ 1000A Frequency Range 30Hz to 5kHz Phase Shift at 50Hz 0.5° @ 1000A Open Secondary Voltage N/A Load Impedance 1MΩ, 100kΩ min. with derating Overload 1200A for 40 mn ON then 20 mn OFF Dimensions  (H x W x D) 4.37 x 8.50 x 1.77” (111 x 216 x 45 mm) Weight 1.21 lb (550g) Operating Temperature 14° to +122°F  (-10° to +50°C) Storage Temperature -4° to +158°F  (-20 to +70°C) Operating Humidity 90% RH Pollution Degree 2      Ingress Protection (IP) IP40 EMC EN 61326-1 Safety Compliance EN/IEC 61010-1 600V CAT III,EN/IEC 61010-032