Loading Loading... Please wait...
  • Request for Quote
  • 713-904-4604
  • My Account
  • Certificates
Free Shipping on Orders Above $250*** Covid 19 Awareness...Use your mask!
  • Yes

AEMC AC/DC Current Probe Model MR526


Product Description

AEMC AC/DC Current Probe Model MR526 The MR526 is a hall effect current probe with 2 ranges designed for DMM and Data loggers. The probe has a 5 ft (1.5m) lead terminated by 4mm safety banana plug and can measure up to 1000AAC and 1400ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied). Maximum Conductor Size Cables: One 1.5” (39mm) or two 1” (25.4mm)Bus Bar: One 1.97 x .49” (50 x 12.5mm) or two 0.98 x 0.2” (25 x 5mm); 1.24” x .30” (31.5 x 10mm) or three 0.98” x 0.31” (25 x 8mm) Current Range 0.5 to 100AAC, 150ADC & 0.5 to 1000AAC, 1400ADC Output Signal 10mV/A & 1mV/A via a 5ft (1.5m) lead with 4 mm safety banana plug Accuracy 50/60Hz ≤1.5% @ 100A & ≤2.5% @ 800A Frequency Range DC to 30kHz (-3dB) (depending of current value) Phase Shift At 50Hz ≤2°@ 100A ≤1.5° @ 800A Load Impedance >1MΩ and ≤100pF Overload 3000ADC or 1000AAC continuous for < 1kHz Zero Adjust Automatic on both ranges Power Supply 9V alkaline Battery (NEDA 1060A, 6LR61) or 5V DC Micro-USB type B Battery Life 50H typical Low Battery Indication Green LED blinking Overload Indication Red LED on when measurement > than selected range Dimensions  (H x W x D) 9.31 x 3.82 x 1.73” (236.5 x 97 x 44mm) Weight (with Battery) 1.15lbs (520g) Operating Temperature 14° to +131°F (-10 to +55°C) Storage Temperature -40° to +176°F  (-40 to +80°C) Relative Humidity Up to 85% @ 35°C Ingress Protection (Ip) IP 40 EMC EN 61326-1 Safety Compliance IEC 61010-1, EN 61010-2-32, Pollution Degree 2, 600V CAT III 

Back to Top