AEMC Digital Multimeter Model 5233

AEMC Digital Multimeter Model 5233   The Model 5233 is a rugged, economical TRMS digital multimeter with a function for non-electrical contact testing (NCV) function for detecting live electrical circuits. This multimeter is designed for safety: IEC61010, 600V CAT IV. The Multimeter Model 5233 provides a Volt, Ohm, Continuity, Diode, Capacitance, Frequency, Duty Cycle and Ammeter function, as well as an AC voltmeter with low input impedance that is capable of finding ghost voltages by adding a burden to the circuit. It can measure up to 10 Amps directly and can measure temperature in both °C or °F using K-type thermocouples. The rotary function switch provides two OFF positions (OFF and OFF NCV). While in the OFF NCV position, the display will turn red if placed close to a live cable, providing a safe and easy way to detect hot wires. This meter has a high sensitivity with a resolution of 0.01mV and can withstand overloads up to 8000V. The Model 5233 is ideal for electrical installers, electricians and heating or air-conditioning specialists.   Counts 6000 Voltage AC/DC 1000VAC/600VDC Current AC/DC 10AAC/DC (15A for 60s max) Bandwidth AC 1kHz Resistance 60MΩ Frequency 3kHz Capacitance 1mF Continuity <20Ω+3Ω Non-Contact Voltage >90V Temperature (K-type TC) -4° to 1400°F (20° to 760°C) Diode Test Yes VLowZ Yes Duty Cycle Yes ∆REL Yes MIN/MAX/AVG/PEAK MIN/MAX Display Digital with 61-segment analog bargraph and backlighting Dimensions  (HxWxD) 6.1 x 2.95 x 2.17" (155 x 75 x 55mm) Weight 11oz (320g) Power Source 9V alkaline battery Battery Life >100 hours Operating Temperature -4° to 158°F (-20° to 70°C) Storage Temperature -32° to 122°F (-35° to 50°C) Pollution Degree 2 Ingress Protection (IP) IP54 EMC EN 61326/A2:2001 Safety Compliance IEC/EN 61010-1, 1000V CAT III, 600V CAT IV