AEMC Instruments 6416 Description:
Eliminates the need to disconnect parallel ground rods and find suitable locations for placing auxiliary ground stakes, this tester employs stakeless testing method to save time and enable users such as industrial and utility electricians, field service electricians, and contractors. This method allows them to perform earth-ground loop tests in locations where it is impossible to use other techniques, including inside buildings or power pylons.
Features
- High sensitivity measurement function of leakage current flowing to ground or circulating in ground loops from 0.2 mA to 40 A
- Resistance measurement from 0.01 to 1500 ?
- Contact voltage indication warns of unsafe conditions
- Selectable test frequency improves accuracy in inductive environments
- Noise icon and buzzer alert user to presence of dangerous voltage and current levels
- Multi-function bright yellow organic display (OLED)
- Data storage function (? and/or A) with time-stamping allows to store up to 2000 measurements
- View stored measurements on the OLED display
- Alarm function with adjustable set point and buzzer for quick field checks for volts, amps and ohms
- Alarm settings and stored memory information saved during shutdown
- Battery life information at power-up and auto power off function
- Large jaw opening of 1.38" (35 mm)
- Rugged Lexan? head and body construction resists breakage
- Auto Power OFF function
- Designed to EN61010-1, 600V Cat. IV safety standards
Applications
- Ground electrode system resistance
- Bonding/continuity checks
- Cell tower grounding verification
- Ground measurements on railroad signaling systems
AEMC Instruments 6416 Specifications:
| Ground Resistance | |
| 0.010 to 0.099 ? | Resolution: 0.001 ? Accuracy (% of reading): ?1.5%, ?0.01 ? |
| 0.10 to 0.99 ? | Resolution: 0.01 ? Accuracy (% of reading): ?1.5%, ?0.01 ? |
| 1.0 to 49.9 ? | Resolution: 0.1 ? Accuracy (% of reading): ?1.5%, ?0.1 ? |
| 50.0 to 99.5 ? | Resolution: 0.5 ? Accuracy (% of reading): ?2%, ?0.5 ? |
| 100 to 199 ? | Resolution: 1 mA Accuracy (% of reading): ?2%, ?1 mA |
| 200 to 395 ? | Resolution: 5 ? Accuracy (% of reading): ?5%, ?5 ? |
| 400 to 590 ? | Resolution: 10 ? Accuracy (% of reading): ?10%, ?10 ? |
| 600 to 1150 ? | Resolution: 50 ? Accuracy (% of reading): 20% approximately |
| 1200 to 1500 ? | Resolution: 50 ? Accuracy (% of reading): 25% approximately |
| Alarm | Adjustable from 1 to 199 ? |
| Frequency Selection | Choice of 50, 60, 128, or 2083 Hz for impedance calculation |
| Current Measurement Range (Auto-Ranging) | |
| 0.200 to 0.99 mA | Resolution: 1 ?A Accuracy (% of reading): ?2%, ?50 ?A |
| 1.000 to 2.990 mA | Resolution: 10 ?A Accuracy (% of reading): ?2%, ?50 ?A |
| 3.00 to 9.99 mA | Resolution: 10 ?A Accuracy (% of reading): ?2%, ?50 ?A |
| 10.00 to 29.90 mA | Resolution: 100 ?A Accuracy (% of reading): ?2%, ?100 ?A |
| 30.0 to 99.9 mA | Resolution: 100 ?A Accuracy (% of reading): ?2%, ?100 ?A |
| 100.0 to 299.0 mA | Resolution: 1 mA Accuracy (% of reading): ?2%, ?1 mA |
| 0.300 to 0.990 A | Resolution: 1 mA Accuracy (% of reading): ?2%, ?1 mA |
| 1.000 to 2.990 A | Resolution: 10 mA Accuracy (% of reading): ?2%, ?10 mA |
| 3.00 to 39.99 A | Resolution: 10 mA Accuracy (% of reading): ?2%, ?10 mA |
| Loop Inductance Measurement | |
| 10 to 100 ?H | Resolution: 1 ?H Accuracy: ?(5% reading +1 ?H) |
| 100 to 500 ?H | Resolution: 1 ?H Accuracy: ?(3% reading +1 ?H) |
| Contact Voltage (Touch Voltage) Calculated | |
| 0.1 to 4.9 V | Resolution: 0.1 V Accuracy: ?(5% reading +0.1 V) |
| 5.0 to 49.5 V | Resolution: 0.5 V Accuracy: ?(5% reading +0.5 V) |
| 50 to 75 V | Resolution: 1 V Accuracy: ?(10% reading +1 V) |
| General Specifications | |
| Jaw Opening | 1.38" (35 mm) |
| Temperature | Operating: -4 to 131?F (-20 to 55?C) Storage: -22 to 158?F (-30 to 70?C) |
| Relative Humidity | Up to 90% at 104?F (40?C) |
| Maximum Overload | Permanent current: 100 maximum 50/60 Hz Transient current: (<5s) 200A 50/60 Hz |
| Display | OLED, 152 segments 1.8 x 1.5" (48 x 39 mm) |
| Memory | 300 measurements |
| Alarm | 3 separate alarms (?, V and A) |
| Power Source | 4 x 1.5 V LR6 (AA) alkaline batteries or 4 NiMH batteries |
| Battery Life | 12 hours or 1440 30-seconds tests approximately |
What's included with the AEMC Instruments 6416
- Clamp-On Ground Resistance Tester
- Calibration Loop
- Hard Carrying Case
- 4 x 1.5 V AA Batteries
- User Manual
0 Reviews Hide Reviews Show Reviews
Aemc
AEMC Ground Resistance Tester Model 6472
$4,239.00
AEMC Instruments 6472 Description: The AEMC 6472 Multi-Function Digital Ground Resistance Tester is a portable measurement instrument designed to measure Bond Resistance, Ground Resistance (with and...
Aemc
AEMC Ground Resistance Tester Model 6417
$1,960.00
AEMC Instruments 6417 Description: Ideal for system troubleshooting in commercial, industrial, and utility applications, this ground resistance tester allows for stakeless ground loop testing and...
Aemc
AEMC Ground Resistance Tester Model 4630
$1,859.00
AEMC Instruments 4630 Description: Rugged and easy to use, this ground resistance tester exceeds mechanical and safety specifications for shock, vibration, and drop tests specified in IEC standards...
Aemc
AEMC Ground Resistance Tester Model 6471
$2,709.00
AEMC Instruments 6471 Description: Portable measurement instrument designed to measure ground resistance with 2 clamps (no auxiliary rods), bond/connection resistance (2-pole and 4-pole Kelvin...
Aemc
AEMC Ground Resistance Tester Model 6418
$1,780.00
AEMC Instruments 6418 Description: Quickly and easily clamp this ground resistance tester around the grounding electrode or conductor and measure the resistance to the ground. By performing...
Aemc
AEMC Ground Resistance Tester Model 6470-B
$2,380.00
AEMC Ground Resistance Tester Model 6470-B The Digital Ground Resistance Tester Model 6470-B performs grounding resistance, earth coupling measurement, soil resistivity and bonding tests. This direct...
Aemc
AEMC Ground Resistance Tester Model 4630 Kit-500ft
$2,689.00
AEMC Instruments 4630 Kit-500ft Description: Rugged and easy to use, this ground resistance tester kit exceeds mechanical and safety specifications for shock, vibration, and drop tests specified in...
Aemc
AEMC Ground Resistance Tester Model 6471 Kit-500ft
$3,569.00
AEMC 6471 500ft Kit Description: The AEMC 6471 Ground Resistance Tester is a portable measurement instrument designed to measure Ground Resistance with 2 clamps (no auxiliary rods), Bond/Connection...
Aemc
AEMC Ground Resistance Tester Model 4630 Kit-300ft
$2,529.00
AEMC Instruments 4630 Kit-300ft Description: Rugged and easy to use, this ground resistance tester kit exceeds mechanical and safety specifications for shock, vibration, and drop tests specified in...
LiveSupporti