Gas Clip Technologies SGC-P-H Two-Year Single Gas Clip Plus (SGC Plus) w/Hibernate Mode - (H2S) Hydrogen Sulfide - Orange
- Gas clip technologies
Gas Clip SGC-P-H DescriptionGas Clip Technologies, Inc. Single Gas Clip Plus (SGC Plus) w/Hibernate mode-Orange Gas Clip Technologies SGC Plus is the only maintenance free single gas detector available with "Hibernate" mode. "Hibernate" mode allows users to place their units in a rested state when not in use. The SGC Plus is perfect for seasonal/turnaround contractors or rental fleets. When your job or turnaround is finished, simply synchronize the instrument with our IR Link or Clip Dock and put the detector in a rested state. When you are ready to use the detector again, simply press the power button to reactivate the detector. With the SGC Plus, you only pay for the time the detector is in use. Each SGC Plus will last for 24 months of use and comes with a warranty of 24 months of use or 3 years from activation (whichever comes first). However, this mode can only be enabled via IR communication with either the IR Link or Clip Dock accessories (not by a button push), so only authorized personnel can place the units in "hibernate" mode. The SGC Plus also provides the most advanced maintenance free disposable single gas detector on the market. Unlike other disposable single gas detectors, the SGC Plus combines a rugged design and reliability with advanced sensor resolution (0.1 ppm for H2S models). Advanced micro processing capabilities allow for quick unit configuration adjustments to comply with current and future industrial health and safety gas exposure regulations for workers in industrial environments. Additional Features:
Bump Check Reminder: All Single Gas Clip models come standard with the bump check reminder feature. When activated, if the detector has not been bump tested within the designated interval, the instrument will emit both a flash and show "buP" across the screen alerting the user, peer, or supervisor that the gas bump test is due. In addition to the flash, the TEST Icon will continually display in the upper left hand corner. This alert increases user accountability and allows for easier policy enforcement. Note the flash feature can be disabled within the IR Link software, if desired.
Programmable unique 6 digit ID: Considering the rugged environment these instruments are often exposed to and used in, identification via serial number, sticker, or marker can be unreliable. With the unique ID feature, units can be identified with a simple push of a button. Available using both limited alpha and full numeric characters, each unit can be assigned a unique ID utilizing, for example an employee ID number, last 4 digits of SSN, or a job code. Unique ID's will also appear on event log reports and bump test logs. ID's will be displayed on the detector screen in segments of 3 digits at a time (first 3 digits, then last 3 digits).
Adjustable alarm set points: To adapt with changing health and safety gas exposure regulations for workers in industrial environments , the Single Gas Clip alarm set points can be easily adjusted via the IR Link software or through the Clip Dock. Detectors can also be special ordered with custom alarm set points.