GW Instek GDS-1102-U 100MHz, 2-channel DSO, 250MS/s with USB,SD card slot

The GDS-1102-U is a 100 MHz digital storage oscilloscope with 5.7" color TFT LCD display. With dual sampling modes, a 4,000 point record length, a real-time sampling rate of 250 MSa/s and an ET sampling rate of 25GSa/s, the GDS-1102-U DSO provides an excellent balance of performance between memory length and sampling speed. Other major features include user-friendly menu tree operations, compact size, ergonomic design, USB host for PC connectivity and USB device port support. The GDS-1000-U Series is designed to meet today's most demanding engineering requirements and budgets. USB Interface & Data Logger The USB Host port on the front significantly enhance the data storage capability of the product. The large amount of data, including screenshot, waveform and panel setup, could be easily stored into a popular flash disk. A USB device port on the rear of the product transfers the screen image and waveform raw data to PC ?? and also allows your PC to remotely control the GDS-1102-U DSO. Waveform Saving & Automatic Measurement A total of 15 waveforms can be saved into memory to be displayed at a later time. Two saved reference waveforms and two live waveforms can be compared on the screen at the same time. All signal time and voltage related measurements can be shown on the screen simultaneously in real-time via the Measure key press. Enhanced Calibration Signal Output The GDS-1102-U has an enhanced 1kHz calibration signal. Its output frequency is adjustable from 1 kHz to 100 kHz and has an adjustable duty cycle of 5% to 95%. Due to the flexible output, the calibration output can also be used as a basic signal generator for other applications. Autoset Disable Function For educational purposes, instructors might not want to use the Autoset function on the DSO when they are teaching how to use oscilloscopes. On the GDS-1000-U Series, the Autoset function can be disabled, allowing students to manually operate the oscilloscope functions to further enrich their learning experience. Go/NoGo Function Go/NoGo testing function check whether the incoming signal violates the user-defined template. Users can easily define this template by setting the tolerance ratio to determine violation conditions. Go/NoGo testing can either keep counting violation number or stop testing when violation conditions are met. Freewave PC Software Freewave DSO remote control and monitoring software is fully supported for the GDS-1102-U series DSOs and is available free of charge from the GW Instek website. Freewave lets you remotely monitor the DSO, capture waveform data or even capture screenshots. Via a USB connection, Freewave is able to provide near-realtime monitoring and control. Flexible saving options allow you to capture data for later analysis and observation. Screen images can be captured to bitmap or jpeg formats. Waveform data can be saved to CSV for spreadsheet manipulation or computer analysis. Waveforms can also be saved as AVI movies to observe signal variation over time. ? Product Features: 100 MHz Bandwidth with 2 Input Channels 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling 4k Memory Length per Channel Peak Detect as Fast as 10ns Save/Recall of 15 Front Panel Settings & Waveforms 5.7" TFT Color Display 19 Auto Measurements Arithmetic Operators - Add, Subtract, FFT USB Port for PC Connection Data Logger Limited Lifetime Warranty