Megger 1007-044 MFT70-US Multi-Function Tester|Testequipmentusa

Megger 1007-044 MFT70-US Multi-Function Tester

(No reviews yet) Write a Review

$2,335.00

Brand

Megger

SKU:

1007-044

Availability:

In Stock

Model No:

MFT70-US

Description
0 Reviews

Megger MFT70 Offers

Features

Simple color-coded test selection and large clear backlit display for ease of use
Internal memory and Bluetooth® communications
3-terminal ground test and stakeless testing for spike resistance measurement
GFCI testing as defined in the ANSI/UL 943, CSA C22.2 No. 144.1 and ANCE NMX-J-520
IEC61010 CATIV safety ratings and tough IP54 case
Altitude 2000 m to full safety specification
Scratch resistant backlit display
Adjustable auto switch off
Small and lightweight
Ambidextrous - Left or right handed operation
Terminal shutters aid connection
Connection label always visible
Dual function display with analogue arc
Features internally rechargeable batteries with a charge time of less than 4 hours

Insulation Test
Output Voltage	-0% +20% at rated load or less
Voltage Display	±3% ±3 digits ±0.5% of rated voltage
Short Circuit Current	1.5 mA nominal test current
Test Current on Load	1 mA at min pass values of insulation
Resistance and Continuity
Intrinsic Accuracy	±2% ±2 digits (0.01 to 99.9 Ω) ±5% ±2 digits (100 Ω to 99.9 kΩ)
Open Circuit Voltage	5 V ±1 V
Test Current	(0 to 2 Ω) 205 mA ±5 mA 15 mA ±5 mA (user selectable)
GFCI Test
Intrinsic Current Accuracy	Ramp test current: ±5% ±1 digit Supply: 48 to 280 V, 45 to 65 Hz Max service error: ±10% ±2 digits
Ground Test
Resolution	0.01 Ω
Current	0.45 or 4.5 mA
Max Probe Resistances	Rp and Rc 100 kΩ at 50 V 5 kΩ at 25 V
Two and Three Pole Method	(0.01 Ω to 1.999 kΩ) ±2.0% ±3 digits

Functionality

The multifunction tester is designed for testing low voltage electrical installations to fulfill the requirements of NFPA70 and the National Electrical Code. It provides all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations, including:

System voltage and frequency measurement (TRMS)
Insulation test at 100 V, 250 V, 500 V and 1000 V
Input protection against live circuits up to 600 V even when insulation test is locked-on
Continuity resistance at 200 mA or 15 mA

Automatic – no need to press TEST which leaves both hands free to hold probes

Resistance range up to 100 kΩ

Fast continuity buzzer and selectable thresholds

GFCI test

Ramp test displays trip current

Ground testing

2-pole
3-pole
Attached Rod Technique (ART)*
Stakeless techniques

Easy to use

The unique modern styling allows it to be operated while standing on the floor, a ladder-shelf or platform, hung around the neck or handheld. Dual TEST and LOCK buttons – one pair at each end – make the tester easy to operate with either the left or right hand.

Easy to pick up and use, the rotary controls are color coded to make range selection fast, along with reducing the chance of using the wrong function or range. Features a large crystal clear backlit display with no hidden menus or complicated screens that uses an innovative digital/analog arc, providing an indication of fluctuating readings. The dual digital readout shows precise values of key measurements and the test parameters simultaneously, such as the output voltage on insulation testing as well as the resistance value in MΩ.

Supplied with NiMH rechargeable cells which can be recharged in the instrument using the provided universal charger. In the event of a flat battery and no facility to charge the tester can also operate from AA Alkaline cells.

Storage and communications

The tester includes built-in memory and Bluetooth® communications that allows you to download memory using the Megger Download Manager (supplied) for simple form filling of test results. The built-in memory also allows results to be stored on the go and transferred to a Bluetooth® enabled device for full traceability.

Safety

This instrument is IEC 61010 CAT IV 300 V rated for connection to low voltage systems with no protective device, so it is safe for connection anywhere on the system up to the source transformer without risk of damage from large transient spikes.

Designed for tough environments and ultimate reliability, this unit features a rubber over mold for extra protection and grip with IP54 protection against dust and water, as well as class leading input protection which ensures it can withstand accidental misuse and voltage transients.

Includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited and a warning beep sounds.

Applications

Ground rod testing
Electrical installations (domestic, commercial and industrial)
Equipment installation
Commissioning
Signage
Lighting installation
Testing and certification
Facilities maintenance
Lightning protection
Micro-generation installation and commissioning
Solar
Maintenance

Write a Review