Description
Conductivity, TDS, resistivity, salinity- measure from pure water to seawater!
- Durable waterproof and dustproof design with IP67 rating - Even with no probes attached
- Single or multipoint calibration; auto or manual - Fast, trouble-free calibration for more accurate measurements
- Large backlit graphic display - Multi-line display with electrode status indicator, calibration data, and more
- User-settable "calibration due" alarm - Out-of-date or unperformed calibrations are now things of the past!
- Built-in real-time clock - Time-and-date stamping meets Good Laboratory Practice (GLP) standards
- Advanced data management - Store up to 500 data sets and download via Infrared IrDA wireless interface
- Set point alarms - Audible warning when readings are outside set points limit
- Accept 2-cell and 4-cell Conductivity probes - Measure over a broad Conductivity range up to 500 mS/cm
- Password protection - Security for calibration and setup menus
Includes:
Meter and batteriesSpecification
| Conductivity | 0 to 500.0 mS |
| TDS | 0 to 500 ppt |
| Salinity | 0 to 80 ppt |
| Resistivity | 0 to 20.00 M? |
| Temperature | -10.0 to 110.0°C (14.0 to 230.0°F) |
| Resolution | 0.05% full-scale; 0.1°C (0.1°F) |
| Accuracy | ±1% full-scale; ±0.5°C (±0.9°F) |
| Calibration | Manual cal, up to 5 points (1 per range); automatic up to 4 points(84.0 ?S/cm, 1413 ?S/cm, 12.88 mS/cm, 111.8 mS/cm).Temperature offset 0.1°C (0.1°F) increments. |
| TDS factor | 0.40 to 1.00 |
| Cell constant | 0.010 to 10.000 |
| Memory | up to 500 sets with GLP date and time |
| Output | infrared, IrDA |
| Real-time clock | time-and-date stamp on calibration andstored data |
| Temperature normalization | 15 or 30°C |
| Temperature coefficient | linear or pure (610 only) |
| Temperature compensation | automatic or manual(selectable) from 0 to 100°C |
| Ambient operating temperature | 0 to 50°C (32 to 122°F) |
| Power | four 1.5 V AA batteries (included) or optionaluniversal AC adapter, up to 200 hours continuous use |
