Piecal 820ELITE Loop Diagnostics Multifunction Diagnostic Calibrator

(No reviews yet) Write a Review

$3,289.00

Brand: Piecal
SKU:: 820ELITE
UPC:

Current Stock:

Quantity:

Adding to cart… The item has been added

Description
0 Reviews

PIECAL 820-ELITE Description

Carry six single function calibrators in the palm of your hand with the PIECAL 820. Measures Milliamps, Voltage, Frequency, Thermocouples, RTDs, pH, Pressure, and can Check Continuity. Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIECAL Evolution Calibrators.

Features

Lighten up your toolbox, this pocket sized calibrator replaces toolbox of single function devices.
Accepts all 32 PIE pressure modules and pumps/accessories making all pressure hardware fully interchangeable
Icons on the display show you where to plug in test leads
Technician friendly operation
Can be used as a milliamp and voltage calibrator
Simulate 2-Wire Transmitters
Power up transmitters & loops with the built-in 24 V power supply
Simplify HART hookups with built-in 250 Ohm resistor
Calibrate directly in temperature (°C & °F)
Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99Hz, 9999.9 Hz & to 20.000 kHz
Troubleshoot loop & wiring problems
'Beep' out connections with the built-in continuity checker.
Quickly set any three outputs plus automatic stepping & ramping
Measure temperature sensors, frequency pickups, loop currents and voltage levels
Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability.
Easily measure pressure with a plug in pressure module
Simulate pH probes into transmitters & analyzers

Specifications

Operating Temperature	-20 to 60°C (-5 to 140°F)
Storage Temperature	-30 to 60°C (-22 to 140°F)
Temperature Effect	≤±0.005%/°C of Full Scale
Relative Humidity	10% ≤RH ≤90% (0 to 35°C), Non-condensing 10% ≤RH≤ 70% (35 to 60°C), Non-condensing
Normal Mode Rejection	50/60 Hz, 50 dB
Common Mode Rejection	50/60 Hz, 120 dB
Noise	≤±1/2 Least Significant Digit from 0.1 to 10 Hz
Protection Against Misconnection	Over-voltage protection to 60 vrms (rated for 30 seconds) Red LED indicates OVERLOAD or out of range conditions
Display	High contrast graphic backlit LCD with 0.315" (8.0mm) high digits
Power Supply	Four "AA" Alkaline 1.5V (LR6)
Battery Life	Read Functions: ≥ 20 hours; Source mA: ≥ 14 hours @ 12 mA into 250Ω Pwr/Meas mA: ≥ 12 hours at 20 mA; Source V, Ω, T/C, RTD & Hz: ≥ 20 hours
Low Battery	Indication with nominal 1 hour of operation left
Dimensions	5.63 x 3.00 x 1.60", 143 x 76 x 41mm
Weight	12.1oz, 0.34kg (including boot & batteries)

Write a Review