RKI 81-SDM6000 SDM-6000 calibration station for GX-6000 with particle filter, connection brackets, & 10Ã??? exhaust tube (no AC adapter)|Tesequipmentusa

RKI 81-SDM6000 SDM-6000 calibration station for GX-6000 with particle filter, connection brackets, & 10?? exhaust tube (no AC adapter)

(No reviews yet) Write a Review

$1,995.00

Brand

RKI Instruments

SKU:

81-SDM6000

Description
0 Reviews

Description

Intended for use with the GX-6000, this docking and calibration station accepts GX-6000 with or without rubber boot.

Features

Charge, calibrate, bump test, and alarm test
Automatically power instruments on / off for scheduled calibration
Simultaneously bump / calibrate, charge, and collect data up to 10 instruments
No tubing, adaptors or wires needed to connect
One power source for all stations
Configure GX-6000 parameters
Centralize instrument data from multiple stations and locations to one network location
Ethernet port for LAN connectivity
Schedule automatic calibration / bump test

Stand alone station

This docking and calibration station is a versatile maintenance tool that automates the service of a GX-6000 portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via SD card (PC software and SD card included).

Modular design

These docking and calibration stations are modular by design and can easily connect to each other without the need of any tubes or cables. One power source and one set of calibration equipment can provide service for up to 10 calibration stations.

Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralized in one network location accessible by anyone with the PC Controlled software with access to the network location.

Specification

Display	Touch panel TFT liquid crystal: 3.5" (8.9 cm), 320 x 240 image element QVGA, RGB1677 million colors Back light
LED	3 colours (green, red, orange) Each status is indicated by Lighting/Blinking
Bump Test	Standard setting values: AIR flush time (15 seconds), GAS time (20 seconds), AIR purge time (5 seconds) Threshold values: ±50%, auto calibration: OFF, auto alarm function check: ON Auto print: OFF
Calibration	Standard setting values: AIR flush time (30 seconds), GAS time (90 seconds), AIR purge time (30 seconds) Auto alarm function check: ON Auto print: OFF
Power (AC Adaptor)	100 to 240 V AC (50/60 Hz)
Operating Conditions	Temperature: 0 to 104°F (-17.8 to 40°C) Humidity: < 95% RH (non-condensing)
USB Printer Port	A type: Connects SDM-6000 printer (SII, DPU-S245) via USB cable
RJ-45 Connector	Ethernet port for a LAN connection
SD Card Slot	Compatible with SD and SDHC cards
Joint Connector	Connecting SDM-6000 (maximum 10 units) and SV-3
Inlet	4 inlets: GAS 1 / GAS 2 / GAS 3 / AIR
Certification	CE marking
Dimensions	5.11 x 13 x 7.2" (0.13 x 0.33 x 0.18 m)
Weight	Approximately 3.7 lbs (1.68 kg)

Write a Review