AEMC AC Current Probe Model LM103 The LM103 is a general-purpose AC current probe designed for Power analyzer, DMM and other measuring instruments with voltage input. It has an output of 1mV per Amp. The LM103 has integral 5 ft (1.5m) leads terminated by safety 4mm banana plugs. Maximum Conductor Size .63" (16mm) Current Range 200Arms AC Measurement Range 0.01 to 350A Output Signal 1mV/A AC (200mV @ 200A) Transformation Ratio 1000:1 Output 5 ft (1.5m) lead with 4mm safety banana plug Accuracy 50/60Hz 1.5% ± 0.02A Frequency Range 48Hz to 10kHz Phase Shift at 50Hz 3° max Load Impedance ¥10Ké Overload 350A continuously up to 1kHz Dimensions (HxWxD) 5.12 x 1.81 x 1.34 (130.4 x 46 x 34mm) Weight 8.8 oz (250g) Operating Temperature 14° to +122°F (-10° to +50°C) Storage Temperature -40° to +176°F (-40° to +80°C) Operating Humidity 85% RH Pollution Degree 2 Ingress Protection (lP) IP40 EMC EN 61326-1 Safety Compliance EN/IEC 61010-2-32, 600V CAT III
0 Reviews Hide Reviews Show Reviews
Aemc
AEMC AC Current Probe Model MN185
$165.00
AEMC MN185 Description: Small, compact and very tough, the MN185 is designed for measurements from 50mA to 120A AC. The "clothes pin" shape makes it ideal for use in tight areas, such as breaker...
Aemc
AEMC AC Current Probe Model MD305
$340.00
AEMC AC Current Probe Model MD305 The MD305 is a high accuracy 600A current probe. It has excellent frequency and phase shift characteristics. Output termination is double insulated 5 ft lead with...
Aemc
AEMC AC Current Probe Model MN01
$95.00
AEMC MN01 Description:
If there is a current in the conductor clamped, the Model MN01 is protected against overvoltages during disconnection from the measurement instrument.
Features
Small,...
Aemc
AEMC AC Current Probe Model MN251T
$252.00
AEMC Instruments MN251T Description: Designed to meet the most stringent demands in industry and electrical contracting, this probe meets the latest safety and performance standards. The probe has a...
Aemc
AEMC AC Current Probe Model MN379
$290.00
AEMC AC Current Probe Model MN379 The AC Current Probe Model MN379 is the latest in compact AC current probes. Designed to meet the most stringent demands in industry and electrical...
Aemc
AEMC AC Current Probe Model MN82
$304.00
AEMC MN82 Description When two MN82 probes are used in conjunction with the AEMC 6471 and 6472, grounding electrodes can be measured without the necessity of installing auxiliary rods and conducting...
Aemc
AEMC AC Current Probe Model MN05
$225.00
AEMC AC Current Probe Model MN05 Small and compact, the AC Current Probe Model MN05 is the ideal complement for any multimeter to measure AC currents in low-power secondary or industrial applications...