Loading Loading... Please wait...
  • Request for Quote
  • 713-904-4604
  • My Account
  • Certificates
Free Shipping on Orders Above $250*** Covid 19 Awareness...Use your mask!
  • Yes

AEMC AC Current Probe Model MN291


Product Description

AEMC AC Current Probe Model MN291 The MN291 is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws). The MN291 offers a VDC output of 100mVDC per AAC and may be used with loggers or other instruments with DC voltage input. The MN291 has integral 5 ft (1.5m) leads terminated by shrouded banana plugs. Maximum Conductor Size 0.78" (20mm), bus bar 20x5mm Current Range 200Arms AC Measurement Range 0.5 to 240A Output 5ft (1.5m) lead safety 4mm banana plug Transformation Ratio N/A Output Signal 100 mVDC/AAC (20VDC @ 200AAC) Accuracy 50/60Hz 2%  @ 200A Frequency Range 40Hz to 10KHz (-3dB) Phase Shift At 50Hz N/A Open Secondary Voltage N/A Load Impedance 1MΩ Overload 240A for 10 min ON, 30 min OFF Dimensions (H x W x D) 5.47 x 2.00 x 1.18” (139 x 51 x 30mm) Weight 6.3 oz (180g) Operating Temperature 14° to +131°F  (-10° to +55°C) Storage Temperature -40° to +158°F  ( -40° to +70 °C) Operating Humidity 90% RH Pollution Degree 2 Ingress Protection (Ip) IP40 EMC EN 61326-1 Safety Compliance EN/IEC 61010-1 600V CAT III,EN/IEC 61010-032


Back to Top